Go back to home

Catch can help

Author
Post
Essentials Only Full Version
liam.obi
Enthusiast
  • Total Posts : 5
  • Scores: 0
  • Reward points: 9
  • Joined: 2016/10/11 05:58:30
  • Status: offline
2016/10/15 20:55:36 (permalink)
0

Catch can help

Hey guys i have a catch can set up on my pinto but it seems to be sucking oil out and smoking any help would be greatly appreciated 

Attached Image(s)

#1


3 Replies Related Threads
    Timw
    Enthusiast
    • Total Posts : 98
    • Scores: 1
    • Reward points: 4289
    • Joined: 2011/08/01 11:02:49
    • Location: Sydney NSW Australia
    • Status: offline
    Re: Catch can help 2017/02/26 00:08:41 (permalink)
    0
    Try a restrictor in the lines to the oil catch can Ensure the pinto tappet cover breather is clean, and the block breather has the baffle fitted to it, and the baffle is not missing or has sections missing. Ensure the tappet cover baffle is fitted at the oil/fill breather
    outlet.
     
    The catch can should have a baffle it it with the inlet pipes connected to standpipes that exit after the baffle.
    Try filling the catch can if no baffle with a polyester insulation packed to fill the interior of the catch tank.
     
     
    post edited by Timw - 2017/02/26 00:21:06
    #2
    NQRS
    Deity
    • Total Posts : 897
    • Scores: 58
    • Reward points: 6931
    • Joined: 2011/08/01 11:02:49
    • Location: Townsville QLD Australia
    • Status: offline
    Re: Catch can help 2017/02/28 21:01:00 (permalink)
    0
    Where does it end up- back to carby or inlet manifold to be burned? has to have an outlet somewhere or crank case pressure builds ?
    #3

    Matt75
    Deity
    • Total Posts : 2184
    • Scores: 67
    • Reward points: 5609
    • Joined: 2011/08/01 11:02:49
    • Location: Doncaster Vic Australia
    • Status: offline
    Re: Catch can help 2017/03/02 13:07:03 (permalink)
    0
    Make sure you cut out and remove the ball bearing in the breather valve on the block.
     
    If you are blowing out oil more than likely your rings are gone and are getting blow by
     
    Cheers
     
    Matt

     
    My 4 door MK II Resto
    http://www.classic-ford.org/cfp/tm.aspx?m=37623

    RS Owners Club Victoria Committee Member - http://rsocvic.com/
     
     
    #4
    Jump to:
    © 2025 APG vNext Trial Version 5.1