Clutch release lever bending/cracked?

Hi guys, ive got a mk2 2L with 4 speed, and over the space of two days my clutch pedal started to drop to the floor, to a point where i couldnt engage the clutch far enough to stop power going to the wheels, wasnt much fun seeing it was peak hour traffic.
 
My first thought was that a strand in the cable had snapped, stretching it, so i bought a new cable. This didnt fix the problem, and ive kept adjusting it and adjusting it and now im at the end of the thread. Its got a new clutch, so the only thing i can put it down to is a bending clutch release lever?
 
Am I on the right track?
 
I thought if trying to weld it, but id rather find one thats fine and just replace it. I found a tf cortina at upullit with 2L and 4 speed, is this the same box? Would the release lever be the same?
 
Any help would be greatly appreciated!
 
Thanks
Ryan

Thanks Rhys, youre a life saver!
 
Im in Blair Athol, so not very close, but i dont mind driving, pulling one gearbox out is better than two!
 
Ive sent you a pm
 
Thanks,
Ryan

Thanks for the help, the clutch is just a standard replacement, i figure a second hand one will do for now, if it happens again then i may as well get a new one.
 
Ryan

Thanks Damion,
 
I might add some metal to brace the one i get so it wont give me any hassle in the future. I want to get one to know the exact shape it should be rather than guess with the one i have.
 
Cheers,
Ryan

you may need to look at the other end  where it pivests on the bell houseing i had one wear at the bell houseing and made a bolt and washer  to locate  it it here - - if you weld them use a welding rod for spring steel - -