Go back to home

Cossie water fittings/lines

Page: < 12 Showing page 2 of 2 - Powered by APG vNext Trial
Author
Post
Essentials Only Full Version
tybrown
Aficionado
  • Total Posts : 328
  • Scores: 0
  • Reward points: 3966
  • Joined: 2011/08/01 11:02:49
  • Location: brisbane queensland Australia
  • Status: offline
RE: Cossie water fittings/lines 2010/10/04 17:15:50 (permalink)
0
2WD Cosworth Thermostat housing looks like this.. this would bolt onto the pinto head... BUT the hose would be facing the wrong direction?

two outlet's on the housing. 1 is turbo water feed the other is to bleed the coolant system.



#16
Mark
Supporter
  • Total Posts : 572
  • Scores: 0
  • Reward points: 5173
  • Joined: 2011/08/01 11:02:49
  • Location: NSW Australia
  • Status: offline
RE: Cossie water fittings/lines 2010/10/04 19:02:17 (permalink)
0
quote:
Originally posted by tybrown

2WD Cosworth Thermostat housing looks like this.. this would bolt onto the pinto head... BUT the hose would be facing the wrong direction?

two outlet's on the housing. 1 is turbo water feed the other is to bleed the coolant system.




...If you have a top tank radiator like in a Mk1/k2 Escort then just drill out one of the lines and plug, neat[;^)]...I used a 1/8 BSP plug...
#17
Page: < 12 Showing page 2 of 2 - Powered by APG vNext Trial
Jump to:
© 2025 APG vNext Trial Version 5.1