dobuy
Enthusiast
- Total Posts : 2
- Scores: 0
- Reward points: 0
- Joined: 2011/08/01 11:02:49
- Location: Dubai United Arab Emirates
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/19 05:34:15
(permalink)
Ah and there was I thinking the radiator was an easy off the shelf solution.
One thing I won't have a problem with is the heater, its going straight in the bin!
|
Mickas 
Aficionado
- Total Posts : 624
- Scores: -38
- Reward points: 757
- Joined: 2011/08/01 11:02:49
- Location: Gold Coast Queensland Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/19 18:41:28
(permalink)
http://www.woodauto.com/vehicle.aspx
That may help... The part number for my Alt Reg. is 85561921...
As I said that is for the 02-04 Focus Zetec. If you use that website above you may find the part number you need and ask the Auto Elecy to get it for you... You really need the thing stripped to identify the reg. and hopefully match the after market one that doesn't require the ecu.
|
Mickas
Aficionado
- Total Posts : 624
- Scores: -38
- Reward points: 757
- Joined: 2011/08/01 11:02:49
- Location: Gold Coast Queensland Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/19 18:50:31
(permalink)
http://www.ashdown-ingram.com.au/CA2571B7001714EB/page/Branch+Locations?OpenDocument&1=08-Branch+Locations~&2=~&3=~
May be find these blokes to match up a reg. also....
Its there parts book we used....
|
bhempstead
Enthusiast
- Total Posts : 80
- Scores: 0
- Reward points: 0
- Joined: 2011/08/01 11:02:49
- Location: Queanbeyan NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/20 17:01:40
(permalink)
Mick
Thanks that is great information
|
Mickas
Aficionado
- Total Posts : 624
- Scores: -38
- Reward points: 757
- Joined: 2011/08/01 11:02:49
- Location: Gold Coast Queensland Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/20 21:06:16
(permalink)
Glad to help mate... Just hope its enough to get you over the finish line !  Love your brakes .. They are on my shopping list...
|
bhempstead
Enthusiast
- Total Posts : 80
- Scores: 0
- Reward points: 0
- Joined: 2011/08/01 11:02:49
- Location: Queanbeyan NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/25 13:55:38
(permalink)
|
mud
Supporter
- Total Posts : 588
- Scores: 12
- Reward points: 2753
- Joined: 2011/08/01 11:02:49
- Location: Crescent Head NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/25 15:29:33
(permalink)
Looks awsome Bill.
|
bhempstead
Enthusiast
- Total Posts : 80
- Scores: 0
- Reward points: 0
- Joined: 2011/08/01 11:02:49
- Location: Queanbeyan NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/25 19:35:38
(permalink)
I have also given the escort wiring 12v tonight and cranked the engine over. Yes it cranks over. It has water, not coolant yet cause I didn't want to waste it while fixing leaks and now I just need to give it some oil and petrol.
|
Paul Dunstan
Supporter
- Total Posts : 1378
- Scores: 35
- Reward points: 4790
- Joined: 2011/08/01 11:02:49
- Location: Adelaide SA Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/25 19:56:40
(permalink)
SWEET!!!!!!!!!
|
Phil
Supporter
- Total Posts : 1786
- Scores: 35
- Reward points: 4581
- Joined: 2011/08/01 11:02:49
- Location: Sydney NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/05/25 20:03:51
(permalink)
Thats awsome Bill  Im looking forward to seeing it in the flesh at AFD[:p]
|
bhempstead
Enthusiast
- Total Posts : 80
- Scores: 0
- Reward points: 0
- Joined: 2011/08/01 11:02:49
- Location: Queanbeyan NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/09/06 13:21:31
(permalink)
Well we are getting very close, just sorting out accelerator cable purchased one from burtons, front and rear brake reservoir lines and sunroof. So let me take you around the car. LED Gear stick knob you need some creature comforts at my age.  SMCKA Battery tray but it needs to be vented for Engineer so I cut and shut the old box into it.  Tweakit swirlpot    Don't really want to show you my wiring its a bit messy with the lift pump and sunroof relay's  And the engine bay now with it backing plate on and trumpets.  Car should start in two weeks.
|
mud
Supporter
- Total Posts : 588
- Scores: 12
- Reward points: 2753
- Joined: 2011/08/01 11:02:49
- Location: Crescent Head NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/09/06 16:27:08
(permalink)
Speachless Bill.  I hope I get to see and hear it in action one day. Cam
|
Mr Mk2
Enthusiast
- Total Posts : 134
- Scores: 0
- Reward points: 1939
- Joined: 2011/08/01 11:02:49
- Location: Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/09/06 18:59:29
(permalink)
|
Andrew
Aficionado
- Total Posts : 325
- Scores: 1
- Reward points: 2773
- Joined: 2011/08/01 11:02:49
- Location: perth WA Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/09/06 21:42:10
(permalink)
Looks really good Bill, really really good Out of interest, what are the throttle bodies?
|
bhempstead
Enthusiast
- Total Posts : 80
- Scores: 0
- Reward points: 0
- Joined: 2011/08/01 11:02:49
- Location: Queanbeyan NSW Australia
- Status: offline
RE: MK2 RS2000 DURATEC 2.3 ***Completed****
2008/09/06 21:57:11
(permalink)
As the injectors go directly into the head you only need an alloy case to hold the butterfly's and trumpets, so half a throttle body maybe. This is a Eurospeed item, I believe Geoff CNC'd it in his shop. Geoff is making another fuel rail for me so I will have some more bling in the engine bay.
|