Re: mk1 / mk2 sway bar front
2017/09/07 21:27:00
(permalink)
If you can't find one. . Use some threaded rod to act like a reverse compression strut ...a few nuts and big washers. at the front bolt a bit of angle to a front swaybar mount with a hole for the threaded rod to slip into and lock it with 2x nuts .I had made up this setup to get a wreck on a trailer along with bent angle for a steering rack! All your really doing is connecting the balljoint to the front swaybar mount with threaded rod. ..obviously 1each side to limit movement. ☺