Sterling
Scholar
- Total Posts : 1060
- Scores: 0
- Reward points: 663
- Joined: 2011/08/01 11:02:49
- Location: Flinders VIC Australia
- Status: offline
diff center - urgent
i blew my welded diff up this arvo (Saturday)
ill be pulling it apart 2moro to update this on what exactly i need,
but its either going to be the center let go, or an axle has snapped
all i know is it was undrivable, making horrible shudders and clunks from the rear if i tried to move it.
cheeRS!
|
gtv6capri
Deity
- Total Posts : 1461
- Scores: 53
- Reward points: 5548
- Joined: 2011/08/01 11:02:49
- Location: Melbourne Vic Australia
- Status: offline
RE: diff center - urgent
2010/10/10 09:50:58
(permalink)
I have a pair of MK2 Escort axles pulled out and ready to go, I think they have longer studs fitted $50 pr I'm in Berwick 0409091252 JR
|
Sterling
Scholar
- Total Posts : 1060
- Scores: 0
- Reward points: 663
- Joined: 2011/08/01 11:02:49
- Location: Flinders VIC Australia
- Status: offline
RE: diff center - urgent
2010/10/10 22:33:11
(permalink)
thanks anyway mate, but as it turns out the axles are fine, i shredded the teeth on the pinion gear! [:u]
|
PeterM
Master
- Total Posts : 933
- Scores: 34
- Reward points: 4984
- Joined: 2011/08/01 11:02:49
- Status: offline
RE: diff center - urgent
2010/10/10 22:42:45
(permalink)
normal.... 
|
Sterling
Scholar
- Total Posts : 1060
- Scores: 0
- Reward points: 663
- Joined: 2011/08/01 11:02:49
- Location: Flinders VIC Australia
- Status: offline
RE: diff center - urgent
2010/10/10 23:28:42
(permalink)
quote:
Originally posted by PeterM
normal....
never in a million years would i expect the teeth to Shear off. there were chunks and metal powder in the diff oil, complete mess!
|
Diablo69
Enthusiast
- Total Posts : 165
- Scores: 0
- Reward points: 1838
- Joined: 2011/08/01 11:02:49
- Location: Glenelg SA Australia
- Status: offline
RE: diff center - urgent
2010/10/10 23:38:20
(permalink)
Have had that happen plenty of times. Really fun to clean up with all that Diff oil everywhere.
Good luck with a replacement I would put a LSD centre in it now.
|
Sterling
Scholar
- Total Posts : 1060
- Scores: 0
- Reward points: 663
- Joined: 2011/08/01 11:02:49
- Location: Flinders VIC Australia
- Status: offline
RE: diff center - urgent
2010/10/10 23:51:28
(permalink)
quote:
Originally posted by Diablo69
Have had that happen plenty of times. Really fun to clean up with all that Diff oil everywhere.
Good luck with a replacement I would put a LSD centre in it now.
mine was welded, good fun, but when it blew thats what i thought was broken..
|
escortinadriver
Deity
- Total Posts : 1278
- Scores: 115
- Reward points: 6097
- Joined: 2011/08/01 11:02:49
- Location: Vic Australia
- Status: offline
RE: diff center - urgent
2010/11/10 10:04:30
(permalink)
Sterling, If it was welded and it blew then it wasn't welded right...  Shaun
|
maxrs
Scholar
- Total Posts : 1334
- Scores: 1
- Reward points: 4483
- Joined: 2011/08/01 11:02:49
- Location: Mango hill Queensland Australia
- Status: offline
RE: diff center - urgent
2010/11/10 10:50:13
(permalink)
quote:
Originally posted by escortinadriver
Sterling,
If it was welded and it blew then it wasn't welded right...
Shaun
I hope the sun gears were removed from the center, before they were welded together. Welding slag and spit will bugger the diff lap. If you did remove the sun gears, Use some grease to check the lap between the c/w and pinion next time. Try not to move one of the end threaded supports, it makes life easy when putting the crown wheel back in the same spot. I have a rebuilt 3.54-1 diff center here if your desperate.
|
Sterling
Scholar
- Total Posts : 1060
- Scores: 0
- Reward points: 663
- Joined: 2011/08/01 11:02:49
- Location: Flinders VIC Australia
- Status: offline
RE: diff center - urgent
2010/11/10 11:43:50
(permalink)
quote:
Originally posted by maxrs
quote:
Originally posted by escortinadriver
Sterling,
If it was welded and it blew then it wasn't welded right...
Shaun
I hope the sun gears were removed from the center, before they were welded together.
Welding slag and spit will bugger the diff lap.
If you did remove the sun gears, Use some grease to check the lap between the c/w and pinion next time.
Try not to move one of the end threaded supports, it makes life easy when putting the crown wheel back in the same spot.
I have a rebuilt 3.54-1 diff center here if your desperate.
Shaun, my welds were fine lol, its the pinion gear that didn't last. and mark, i removed the spider gears & the crown wheel, then removed the crown, and put the center in a vice and welded away. what i think may have happened is bits of my welded center falling apart may have got chewed up by the pinion and crown...?? and in regards to the 3.54 mark, ill let you know, im trying to get the car moving again for an event Friday night, but it may not be possible
|
escortinadriver
Deity
- Total Posts : 1278
- Scores: 115
- Reward points: 6097
- Joined: 2011/08/01 11:02:49
- Location: Vic Australia
- Status: offline
RE: diff center - urgent
2010/12/10 09:03:23
(permalink)
If you need I have spare CWP sets.
Shaun
|
Sterling
Scholar
- Total Posts : 1060
- Scores: 0
- Reward points: 663
- Joined: 2011/08/01 11:02:49
- Location: Flinders VIC Australia
- Status: offline
RE: diff center - urgent
2010/10/13 08:56:17
(permalink)
found a replacement crown wheel and pinion gear off colin at cam automotive, so the cars moving again!
|