Go back to home


We have detected that you are using ad blocking software.
The Classic Ford forum is made possible by ad revenue.
Please disable your ad blocker to ensure that this site lives on.

Hot!Fuel filler hose

Author
Paul Dunstan
Supporter
  • Total Posts : 1345
  • Scores: 35
  • Reward points: 4370
  • Joined: 2011/08/01 11:02:49
  • Location: Adelaide SA Australia
  • Status: offline
2020/04/01 00:15:38 (permalink)
0

Fuel filler hose

Hi All. Wanting to finish my tank install but needing the fuel hose to join the filler tube to the tank (under boot mounted). It appears to be 2.25” or 57mm ID which is available in 1m lengths but only need approx 100mm. By any chance has anyone got anything available? I know I can get this specific part from some suppliers but asking here first.

Cheers

Paul
#1


7 Replies Related Threads

    GYRO
    Enthusiast
    • Total Posts : 33
    • Scores: 0
    • Reward points: 1027
    • Joined: 2017/12/27 16:35:44
    • Location: Perth WA
    • Status: offline
    Re: Fuel filler hose 2020/04/03 11:55:27 (permalink)
    0
    Hi Paul, I have some I bought for my mk2 but it is 41mm id. Are you sure about the size. If this helps I will post. cheers Peter.
    #2
    Jamman
    Aficionado
    • Total Posts : 47
    • Scores: 6
    • Reward points: 3628
    • Joined: 2011/08/01 11:02:49
    • Status: offline
    Re: Fuel filler hose 2020/04/03 19:45:37 (permalink)
    #3

    Paul Dunstan
    Supporter
    • Total Posts : 1345
    • Scores: 35
    • Reward points: 4370
    • Joined: 2011/08/01 11:02:49
    • Location: Adelaide SA Australia
    • Status: offline
    Re: Fuel filler hose 2020/04/03 23:52:41 (permalink)
    0
    Thank guys. Yes the filler neck has an OD of 57mm.
    Buying by the inch is similar to those items specifically made for the job 😡

    Cheers

    Paul
    #4
    GYRO
    Enthusiast
    • Total Posts : 33
    • Scores: 0
    • Reward points: 1027
    • Joined: 2017/12/27 16:35:44
    • Location: Perth WA
    • Status: offline
    Re: Fuel filler hose 2020/04/04 13:15:42 (permalink)
    0
    Hi Paul, yes sorry got my wires crossed, the 41mm hose was for inlet manifold. cheers Peter.
    #5
    ratta tat tat
    Supporter
    • Total Posts : 1612
    • Scores: 36
    • Reward points: 4348
    • Joined: 2011/08/01 11:02:49
    • Location: Brisbane
    • Status: offline
    Re: Fuel filler hose 2020/04/19 23:32:32 (permalink)
    0
    Hi Paul. I bought some continental hose from ENZED. This was to replace the silicone hose that GRP4 supply with their tanks which allows fuel vapours to permeate through and stink the car out. No problems after replacing it with this stuff 

    Attached Image(s)

    #6
    PeterM
    Master
    • Total Posts : 901
    • Scores: 32
    • Reward points: 4269
    • Joined: 2011/08/01 11:02:49
    • Status: offline
    Re: Fuel filler hose 2020/04/22 07:11:32 (permalink)
    0
    I have the exact hose available at: http://www.peterlytton.com/
    #7
    Paul Dunstan
    Supporter
    • Total Posts : 1345
    • Scores: 35
    • Reward points: 4370
    • Joined: 2011/08/01 11:02:49
    • Location: Adelaide SA Australia
    • Status: offline
    Re: Fuel filler hose 2020/04/22 22:15:28 (permalink)
    0
    Hi Pete. Yes I noticed that. Will be in touch.

    Cheers

    Paul
    #8
    Jump to:

    © 2020 APG vNext Commercial Version 5.1