Go back to home

Another crossflow engine question

Author
Post
Essentials Only Full Version
mickrh999
Enthusiast
  • Total Posts : 1
  • Scores: 0
  • Reward points: 1
  • Joined: 2017/10/04 05:39:40
  • Status: offline
2017/10/04 05:42:45 (permalink)
0

Another crossflow engine question

I have a 681f 6015 DA (tall block 1600) crossflow that is in pretty much standard condition eg chambered head, dished pistons....I also have a 711m "flat" head and (you've guessed it) I was wondering if the head could be swapped without much trouble and what the likely compression ratio increase would be. Cheers Mick.
#1


1 Reply Related Threads
    RickC
    Enthusiast
    • Total Posts : 5
    • Scores: 0
    • Reward points: 243
    • Joined: 2017/04/12 10:57:02
    • Status: offline
    Re: Another crossflow engine question 2017/11/20 22:55:08 (permalink)
    0
    Hi Mick,
    I have a 681F block with a 711 flat head, I'm not sure how much it is going to increase your compression ratio by, you could pull the head off and CC the chamber and work it out.
     
    Cheers,
    Rick
    #2
    Jump to:
    © 2025 APG vNext Trial Version 5.1