Go back to home

Mk 1 and Mk2 Parts Clean out

Author
Post
Essentials Only Full Version
Ionix
Aficionado
  • Total Posts : 314
  • Scores: 8
  • Reward points: 4329
  • Joined: 2011/08/01 11:02:49
  • Status: offline
2015/11/26 07:44:38 (permalink)
0

Mk 1 and Mk2 Parts Clean out

a few items sold, if you are still looking for anything let me know. If i havent written back or replied, please let me know and I will do my best to get in contact.
Hi All,
All parts located in qld. Let me know if you are looking for something in particular and I may have it but not listed it. All prices are ONO.
  • 1600 Struts with lowered king springs from Mk2 with Large Strut tops, springs and shocks only about 2000k old - $60
  • Mk2 X Member, still useable but someone had tried to drill new holes in it to change camber, but didnt do a very good job so i welded these up and put supports (thick large diameter washers) either side of the original holes with engine mounts and rubbers - $30
  • Lower control arms, rubbers need replacing (pair) - $10
  • Brake boosters with master cylinders (mk2) - $20 for a set 
  • Starter motors for 1100 and 1300 - $20 each
  • Mk1 and Mk 2 Steering Racks, Mk2 will need a rebuild as has a slight wobble in rod ends of rack - $30
  • Pinto Alternator - $30
  • Various front and rear lights from Mk 1 - Just ask/make an offer
  • Charcoal canister setup from pinto - $10
  • Ford sierra ECU, Wiring, AFM, Standard injectors etc, anything that wasn't needed from a standard sierra setup - $40
  • Pinto Distributors, work well - $30
  • 4 Speed Gearbox, no issues - $50
  • mk2 centre console - $20
  • Mk1 Standard seat belts,  Brown - $10
  • If you are looking for anything in particular, just ask, i may have it
A few more items i just remembered about
  • Rear seat, both pieces for mk 1 - good condition, tan colour
  • Standard webber carb, was running when removed from pinto
  • Mk2 Radiator for pinto
  • mk1 bonnet - it flew up when driving once but anyone who knows how to panel beat would be able to fix it i imagine. It was out of my skill set
  • mk1 square headlights
  • mk1 square head light grill 
 
As i find more stuff ill post it up in this post.
 
Thanks,
Kieran
post edited by Ionix - 2016/01/11 11:33:49
#1


8 Replies Related Threads
    Pecker
    Enthusiast
    • Total Posts : 5
    • Scores: 0
    • Reward points: 1538
    • Joined: 2014/07/30 12:54:16
    • Location: Kalgoorlie
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/26 14:52:01 (permalink)
    0
    Could you advise if the struts will fit my mk2 2000 with this type of top as pictured. ? 

    Attached Image(s)

    #2
    Flighter
    Deity
    • Total Posts : 1107
    • Scores: 43
    • Reward points: 5151
    • Joined: 2011/10/17 14:55:59
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/26 15:47:53 (permalink)
    0
    PM sent.

    WTB: Recaro seat - any condition considered
     
     
    #3

    Ionix
    Aficionado
    • Total Posts : 314
    • Scores: 8
    • Reward points: 4329
    • Joined: 2011/08/01 11:02:49
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/26 20:54:46 (permalink)
    0
    Hi pecker. They would, but youd want to use the same strut tops. I don't think you'd want to swap out 2l struts for 1600 ones anyway as the spring diameter is smaller etc
    #4
    BUZ440
    Enthusiast
    • Total Posts : 106
    • Scores: 1
    • Reward points: 2205
    • Joined: 2013/06/21 20:29:48
    • Location: Brisbane
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/26 23:09:17 (permalink)
    0
    Steering arms that bolt to struts, hole width about 85mm?

    NISROLA - 1976 KE30 Two Door

    BUZ440 - 1966 Mk1 Cortina

    Free yourself from engine racism!
    #5
    Ionix
    Aficionado
    • Total Posts : 314
    • Scores: 8
    • Reward points: 4329
    • Joined: 2011/08/01 11:02:49
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/27 08:44:03 (permalink)
    0
    BUZ440
    Steering arms that bolt to struts, hole width about 85mm?

    Hi Buzz, as in the lower control arms? or the tie rod ends?
    #6

    Cholaso
    Enthusiast
    • Total Posts : 84
    • Scores: 1
    • Reward points: 4634
    • Joined: 2011/08/01 11:02:49
    • Location: Sydney NSW Australia
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/29 22:43:50 (permalink)
    0
    HI Kieren,
     
    Am interested in the mk2 booster and master cylinder assembly. Can you confirm its in good working condition. I am in Sydney and am happy to pay for postage.
    Am also interested in the carburetor is it a 32/36?
    What about the heater box and panel? Do you have one of those?
     
     
    Thanks
     
    Rodney
    #7
    BUZ440
    Enthusiast
    • Total Posts : 106
    • Scores: 1
    • Reward points: 2205
    • Joined: 2013/06/21 20:29:48
    • Location: Brisbane
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/29 23:17:32 (permalink)
    0
    Ionix
    BUZ440
    Steering arms that bolt to struts, hole width about 85mm?

    Hi Buzz, as in the lower control arms? or the tie rod ends?




    Arms that bolt to the back of the struts and the steering arms connect too?

    NISROLA - 1976 KE30 Two Door

    BUZ440 - 1966 Mk1 Cortina

    Free yourself from engine racism!
    #8
    Ionix
    Aficionado
    • Total Posts : 314
    • Scores: 8
    • Reward points: 4329
    • Joined: 2011/08/01 11:02:49
    • Status: offline
    Re: Mk 1 and Mk2 Parts Clean out 2015/11/30 15:39:38 (permalink)
    0
    Hi Sorry Buzz, no i dont.
    #9
    Jump to:
    © 2025 APG vNext Trial Version 5.1