Go back to home

Gear stick required urgently

Author
Post
Essentials Only Full Version
phoenix 13918
Enthusiast
  • Total Posts : 187
  • Scores: 4
  • Reward points: 1705
  • Joined: 2012/05/17 17:44:08
  • Location: Adelaide
  • Status: offline
2014/09/06 13:03:18 (permalink)
0

Gear stick required urgently

Hi guys, I really hope that someone can help me here.
 
The gear stick on my '72 TC Cortina broke today on the way to pick up my Dad for a fathers day lunch so I am in desperate need of a replacement.  She is a 4 speed car with a pinto engine
 
Cheers guys
 
Nick
#1


4 Replies Related Threads
    cosworthfreak
    Moderator
    • Total Posts : 684
    • Scores: 53
    • Reward points: 5517
    • Joined: 2011/08/01 11:02:49
    • Location: Location
    • Status: offline
    Re: Gear stick required urgently 2014/09/06 13:11:43 (permalink)
    0
    Put up a picture of it if you can, so we can see what style shifter it is and where it broke. If it's an internal linkage box (where the shifter screws into the rear extension housing) measure across the plastic thread of the shifter where it screws into the box. There are a few different diameters.

    Cheers
    Jamie
    #2
    phoenix 13918
    Enthusiast
    • Total Posts : 187
    • Scores: 4
    • Reward points: 1705
    • Joined: 2012/05/17 17:44:08
    • Location: Adelaide
    • Status: offline
    Re: Gear stick required urgently 2014/09/06 13:22:24 (permalink)
    0
    The plastic ring or band or what ever it was that holds the plastic thread that screws to the box is what has broken so the shifter is no longer held in place when the thread is screwed into the box
     
    #3

    phoenix 13918
    Enthusiast
    • Total Posts : 187
    • Scores: 4
    • Reward points: 1705
    • Joined: 2012/05/17 17:44:08
    • Location: Adelaide
    • Status: offline
    Re: Gear stick required urgently 2014/09/06 13:37:24 (permalink)
    0
    According to my vernier calipers the thread is 41.5mm
    #4
    cosworthfreak
    Moderator
    • Total Posts : 684
    • Scores: 53
    • Reward points: 5517
    • Joined: 2011/08/01 11:02:49
    • Location: Location
    • Status: offline
    Re: Gear stick required urgently 2014/09/06 15:43:05 (permalink)
    0
    Ok, I've found a couple which may suit. The one on the left measures 41.7mm and the one on the right 41.6. Sorry the photos aren't perfect.

    As you'll see, the thread on the right one is better (the left one has had the bottom most section trimmed for some reason, but the remaining thread is still ok. The right one is curved and a bit shorter and the left is straight.

    They are both missing the circlip that holds the cone shaped rubber boot down (which keeps the joint in tension), but you could just use the one from your broken shifter.

    I'm happy to sell both together for $70, that way you could have a spare that would get you out of trouble in the short term.

    Cheers
    Jamie

    Attached Image(s)

    #5
    Jump to:
    © 2025 APG vNext Trial Version 5.1