Go back to home

Answered32/36 weber float level settings

Author
Post
Essentials Only Full Version
shepv8
Enthusiast
  • Total Posts : 147
  • Scores: 2
  • Reward points: 3746
  • Joined: 2011/09/15 20:29:55
  • Status: offline
2013/11/27 21:13:44 (permalink)
0

32/36 weber float level settings

Gday all,
       in the process of rebuilding a standard 32/36 DGAV carb for my 2 litre. I used the settings out of the gregorys manual which state 35.3mm for the vertical measurement and 45mm for the horizontal level measure. I have a plastic float. Ive searched around the web and have since found a number of sources stating the horizontal setting should be 51mm, not 45mm. What do those knowledgable with these webers recommend as the horizontal setting ?
        Cheers
                  Shep
#1
See best answer

2 Replies Related Threads
    RS 2000
    Deity
    • Total Posts : 536
    • Scores: 51
    • Reward points: 6199
    • Joined: 2011/08/01 11:02:49
    • Location: South Australia
    • Status: offline
    Re: 32/36 weber float level settings 2013/11/27 21:47:13 (permalink) ☼ Best Answerby shepv8 2013/11/28 21:40:15
    0
    Lower setting isn't as critical both 45 and 51 will provide sufficient needle unseat. Go 48mm 😉

    Cheers

    1979 RS 2000 - SR20DET
     http://www.classic-ford.org/cfp/tm.aspx?m=48366
    PERFORMANCE AUTO & DYNO
    https://www.facebook.com/PerformanceAutoDyno/
    https://www.performanceautodyno.com.au/
    #2
    shepv8
    Enthusiast
    • Total Posts : 147
    • Scores: 2
    • Reward points: 3746
    • Joined: 2011/09/15 20:29:55
    • Status: offline
    Re: 32/36 weber float level settings 2013/11/28 21:40:00 (permalink)
    0
    OK thanks, will do that. Im guessing by your comments that the top setting is more critical and as all sources state 35mm that is what I shall use for the top setting.
     
             Cheers
            Shep
    #3

    Jump to:
    © 2025 APG vNext Trial Version 5.1