FIA Kill Switch & Starter Button

Hi Guys,
 
I am installing a FIA KIlls Swict and thought i'd remove the key ignition too as mine is on it's way out.  I will have the Kill switch, an accessory switch and a seperate one for the fuel pump. Here is the instruction sheet for the kill switch

 
Can anyone shed some light as to which wires are which on the back of the inginition switch?  Specifically which one is the accessory wire,  coil wire and which is the ignition wire activated by the key to start the car so i can wire this through the start button.
 

 
Cheers
 
Matt
 
 
 
 
 
 

Hey Peter,
 
The wires are as follows -
Solid yellow
Green with blue stripe
Solid Black
Red with green stripe
Purple with white stripe
Red with Blue stripe
 
Cheers
 
Matt

That's pretty close.
The Ford wiring schematic I've got says :
 
Green / light blue stripe = Accessories (1st position)
Red / light green stripe  = Ignition (2nd position)
Red / light blue stripe    = Start (3rd position)
Violet / white stripe       = Brake warning light
Black                           = Earth / ground
Yellow                          = Raw battery / constant live
 
Cheers, Jason.

Hi Matt,
Checked the switch I have like yours it's as Jason's post.
The brake warning switches to the ground in start position.
Peter

Got it all sorted by my auto elec mate.
 
Check out my thread for the result.
 
Cheers to all who posted.
 
Matt