Which clutch for sierra 5spd?

Hi all,
Where can i get a clutch for crossflow - sierra 5 speed.
have brand new 4 speed assembly but this wont fit will it?
Any help much appreciated
 
 

GDub and I are talking Escort mk2 boxes.... I have a very vaig recollection that some early boxes in Anglia and Cortinas used a slightly smaller input shaft. Escort Mk2 and Sierra (2lt 4cyl) 5sp box are definately the same splines and same clutch therefore (at least the Aussie ones...) Without being certain, it would appear that you may need a mk2 escort 1.6 clutch... you may need to do some Google research...

You need a clutch plate from a Sierra 1600 OHC - buy this from the UK. I think Burtons have them for about 10 quid. Note it is the 1600 Pinto, not a 1600 XFlow.
These are the correct 7.5" diameter with the 23 spline of the 5 speed. I don't think any car here used this combo.
Use your original Cross flow pressure plate if you are keeping the flywheel. Get a 6 bolt if you don't already have one, bit stronger.
The only variable will be the throwout bearing; there are different types in the thickness of them and this will affect the position of the clutch fork and thence the adjustment on the cable. You will need to use a 2L one as I think the original 1600 box nose is smaller.
Use the 2L clutch fork to match the bellhousing.