Go back to home

Helpful ReplyHas anyone put a 2JZ-GE into a escort???

Page: 12345.. > >> Showing page 1 of 7 - Powered by APG vNext Trial
Author
79FordEsky
Enthusiast
  • Total Posts : 153
  • Scores: 0
  • Reward points: 3668
  • Joined: 2012/03/07 18:55:24
  • Status: offline
2012/06/10 23:42:50 (permalink)
0

Has anyone put a 2JZ-GE into a escort???

I was thinking has anyone put a 2JZ-GE in a escort and would it be legal as it is a 2997cc 3.0ltr and it produces 220hp stock.
 
Cheers Stewart
#1
List Solutions Only

94 Replies Related Threads

    phoenix 13918
    Enthusiast
    • Total Posts : 187
    • Scores: 4
    • Reward points: 1705
    • Joined: 2012/05/17 17:44:08
    • Location: Adelaide
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 12:04:02 (permalink)
    0
    I'm fairly certain you'll find that engine is too long and wont fit without some significant surgery
    #2
    krt10
    Scholar
    • Total Posts : 663
    • Scores: 21
    • Reward points: 3808
    • Joined: 2011/08/01 11:02:49
    • Location: adelaide sa Australia
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 14:58:10 (permalink)
    0
    seen it in a spaceframed escort.  not much of the standard body left though
    #3

    79FordEsky
    Enthusiast
    • Total Posts : 153
    • Scores: 0
    • Reward points: 3668
    • Joined: 2012/03/07 18:55:24
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 18:47:50 (permalink)
    0
    What do you mean by a space frame, also i was thinking the 2JZ-GE motor with notched shock towers, and custom lower mounts and also move the firewall towards the cabin. What about with rear diff, using stock shocks upgraded brakes also rear suspension discs brakes?
    #4
    RallyPack
    Enthusiast
    • Total Posts : 70
    • Scores: 1
    • Reward points: 1412
    • Joined: 2011/08/01 11:02:49
    • Location: Sunshine Coast, QLD
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 18:53:23 (permalink)
    0
    You shouldn't need to notch the shock towers ? but you'll need a substantial recess in the firewall, heres a pic of the tubeframed mk2 with a 2j

    post edited by RallyPack - 2012/06/11 18:57:41

    Cheers Daryl
    79 'Sport Pack' Escort
    #5
    79FordEsky
    Enthusiast
    • Total Posts : 153
    • Scores: 0
    • Reward points: 3668
    • Joined: 2012/03/07 18:55:24
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 18:58:41 (permalink)
    0
    what about diff use a hilux one? But it is going to be a hell lot different then a sr20 or a ca18 so yeh, I want it to be a sleeper 
    #6

    ratta tat tat
    Supporter
    • Total Posts : 1633
    • Scores: 40
    • Reward points: 5492
    • Joined: 2011/08/01 11:02:49
    • Location: Brisbane
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 19:03:27 (permalink)
    0
    79FordEsky 2JZ-GE in a escort and would it be legal

     
    No. Engine capacities in Qld are determined by these formulae. 
    Vehicle weight  x 2.5 forced induction 
    Vehicle weight  x 3 naturally aspirated 
      
     


    #7
    79FordEsky
    Enthusiast
    • Total Posts : 153
    • Scores: 0
    • Reward points: 3668
    • Joined: 2012/03/07 18:55:24
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 19:19:49 (permalink)
    0
    in nsw where i am it is that but  its a 3.0 litre and my ghia is 1003 kg stock times by 3 is  3009 and forced induction (turbo/supercharged) is 2507.5 so the engine is naturallya spirated  non turbo so it can be done right
    #8
    evobda2
    Scholar
    • Total Posts : 412
    • Scores: 20
    • Reward points: 4930
    • Joined: 2011/08/01 11:02:49
    • Location: NSW, Australia
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 19:28:01 (permalink)
    +1 (1)
    Why are people so adamant lately in putting long 6cyl engines in escorts? Someone else asked the same thing but with a xr6 falcon motor?..
     
    Escorts don't have a very big engine bay at all, they are tight enough with a decent twin cam 4cyl as it is.
     
    Personally i think adding a heavy long engine like the 6cyl and the amount of work required is just a waste. You would ruin a great handling car and spend a small fortune doing it.
    You'd be better off sticking to a tried and much easier 4cyl setup whether it be Duratec, YB Cosworth, Turbo Pinto, SR20 etc etc.
    If your really wanting larger long engines like 6cyl's then look at capri's. It will be much easier to do with there much larger engine bay and also much simpler to engineer as they came with a V6 model as standard in AUS!!
    #9
    79FordEsky
    Enthusiast
    • Total Posts : 153
    • Scores: 0
    • Reward points: 3668
    • Joined: 2012/03/07 18:55:24
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 20:15:15 (permalink)
    0
    I want a sleeper, Also what about a capri v6 in a escort a mate suggested it to me,Well we want more performance from the car as the pinto, zetec, have a certain limit of power that you can get out of them, but I dont really care its my car i do what i want to do so yeh. 
    #10
    Mish
    Master
    • Total Posts : 506
    • Scores: 33
    • Reward points: 4168
    • Joined: 2011/08/01 11:02:49
    • Location: Melbourne Vic Australia
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 20:32:33 (permalink)
    0
    id be steering well clear of anything with 6 or more cylinders, way to much weight past the front shock towers is bad news, will ruin the handling of a fun little car,
    as for power outputs a std sr20 with drop in cams, injectors and decent size t2 frame turbo will push out 230-250 rwkw which is way way more then enough in an escort.
    you can also get good power out of, 4age, 4agze, 3sgte, ca18, bp, bpt, duratec, 
     
    my 4door escort is fitted with a Ford/Mazda BPT engine and puts out 150rwkw at 8psi and will easily overpower the rear tyres.
     
    if out and out horsepower is what i want put a rotary in it with a turbo the size of a small house, that'll be good for upwards of 450rwkw, just wont be drivable.

    < MkII 1600 Sports - Genuine >
     < MkII  Escort  BPT powered >

    http://www.classic-ford.org/cfp/tm.aspx?&m=15821&mpage=1


    #11
    fordsy
    Aficionado
    • Total Posts : 797
    • Scores: 13
    • Reward points: 3029
    • Joined: 2011/08/01 11:02:49
    • Location: Location : Location !
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 20:40:31 (permalink)
    +2 (2)
    If you really want a sleeper, put a Chev 350 in an old Volvo wagon. Fit it with roof racks, venetian blinds, blanket on the rear seat and wear a cardigan and silly hat while driving.
     
    Or you could mid mount a 460 in a Bedford. Paint it like a flower delivery van. Vrooom vroom.
     
    Or even better still, buy about a 10 year old Fairlane or Statesman for the same money you'd waste on building a 6 cylinder Escort that would never be even close to roadworthy and drive around in a very comfortable car without forever being worried about having the bonnet raised at a random breatho.
     
     

    Bloke who looks after my vehicle fleet: http://www.hillsmeadeautomotive.com.au/
    #12
    79FordEsky
    Enthusiast
    • Total Posts : 153
    • Scores: 0
    • Reward points: 3668
    • Joined: 2012/03/07 18:55:24
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 21:00:57 (permalink)
    0
    fordsy i know what you mean but i want the escort to have power when i need it, Mish i thinkn i will go with a sr20 no turbo 
    #13
    esc-078
    Enthusiast
    • Total Posts : 152
    • Scores: 5
    • Reward points: 2868
    • Joined: 2011/08/01 11:02:49
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 21:16:05 (permalink)
    +2 (2)
    I have done it!!
     
     
    See picture. 
      
      
     
    2 Jay-Z in a Escort

    Attached Image(s)

    #14
    Knightime
    Aficionado
    • Total Posts : 102
    • Scores: 7
    • Reward points: 1673
    • Joined: 2012/02/25 21:53:17
    • Location: Logan QLD
    • Status: offline
    Re:Has anyone put a 2JZ-GE into a escort??? 2012/06/11 21:22:53 (permalink)
    0
    Stick a BDG in it.
    #15
    Page: 12345.. > >> Showing page 1 of 7 - Powered by APG vNext Trial
    Jump to:
    © 2025 APG vNext Trial Version 5.1