Go back to home

We have detected that you are using ad blocking software.
The Classic Ford forum is made possible by ad revenue.
Please disable your ad blocker to ensure that this site lives on.

Turbo noob question

Page: < 12 Showing page 2 of 2
  • Total Posts : 20
  • Scores: -3
  • Reward points: 46
  • Joined: 2012/06/12 04:10:18
  • Location: Cape Town
  • Status: offline
Re:Turbo noob question 2012/06/13 07:32:27 (permalink)
The Gt28rs is good for 310-350hp flowing around 35 lbs, 9.0.1 should be ok if your Ecu is tuned good, This turbo is the AKA Disco potato, has almost no lag depending which choice of turbine you opted for, and a common upgrade amongst the guys here on the 200sx/ Ca18det/sr20det.
  • Total Posts : 156
  • Scores: 3
  • Reward points: 1995
  • Joined: 2011/08/01 11:02:49
  • Status: offline
Re:Turbo noob question 2012/06/13 12:55:34 (permalink)
I've managed to fit an 80mm thick intercooler in front of a 50mm rad and pinto in a flat front Mk2. Zetecs look a bit smaller, so you should be able to fit a 60mm intercooler with your eyes closed.
Also running a GT2871 with 7.4:1 compression (way too low), but its still very responsive and holds 16psi to 6500rpm without any issue. The disco should be a good match.
Page: < 12 Showing page 2 of 2
Jump to:

© 2021 APG vNext Commercial Version 5.1