You will have to post up a few pics of what you do. Always good to see other people's ideas!

Ok,
Had the car clay barred and polished today. When I got the car from the other side of Australia it came over on a train. This left it with iron dust bedded into the paint. Its all out now though!
While it was shiney I thought id take some pics.



[/URL
[URL=http://imageshack.us/photo/my-images/831/saph5.jpg/]






Ive been looking at some of the wiring in the car and it hasnt realy been to my liking.
I removed the standard fan switch and set up the Autronic to take care of switching the fans. Much more acurate than a old switch!
I will be rewiring the fuel pump. Then rewiring the radio. Next year when I pull the engine for a rebuild the whole loom will get a going over!
Let me know what you think!

Update time!
 
I finaly got some 324mm MK1 RS Focus front disks over from the UK. So I fitted up my E38 BMW 4pot Brembo calipers. I left them black without any brembo stickers so they look standard. Replaced the front wheel bearings too as the front right was getting a bit noisy!
I have also taken delivery of ARP, head studs, main studs, rod bolts and flywheel bolts. New cambelt, tensioner, stud and nut. Some gaskets getting ready for engine rebuild. I will wait to get the cosworth pistons and bearings until I know what sizes I need. I know its std bore so hopefuly it will only need .25mm over bore.
My black samco full coolant hose set arived too.
 
Here's the brakes.
 

 
 

 
 

 

Hi mate. No im not in FRSCWA but I wouldnt mind dropping down to a club meet to check it out. Depends when im off work!
Ive still got a few things I would like to fix/change but its getting there! Will be a long term project!

Im south of river mate. Around Kwinana.

Thanks. Stops good!
When you sending your bits over? Are you getting ready for a freshen up!
All I want to do is hydraulic clutch, engine rebuild, new clutch, upgrade diff centre and some new wheels and suspension work.
 
Not much realy.....................

I think it looks great!  I should - it's my old car.  PM me if you want any info.  This was my first Cossie and hopefully not my last.  I've always liked the Saffs particularly the 4x4 with sharks tooth alloys.  The 3 doors have grown on me now as have the Escorts.  Anyway, you've got a good honest car there and it looks pretty much as I sold it.  Enjoy!  PS - I spent alot of time wiring the Autronic up properly guided by an Autronic dealer/fitter.  I had trouble getting the SMC to turn the fans on as it seemed to conflict with the A/C switch.  I gave up in the end.  Apart from that the wiring was pretty standard when I sold it.  It had Koni's on the rear when I sold it.  Oh, also, it has a group a headgasket and the block is wire ringed apparently.  Regards.