TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
Parts wanted
Hey guys,
I'm chasing a factory amplifier and a set of standard side repeaters/indicators for my recently acquired Sierra RS Cosworth.
Cheers,Paul.
|
ossie cossie
Enthusiast
- Total Posts : 155
- Scores: 0
- Reward points: 3002
- Joined: 2011/08/01 11:02:49
- Location: perth W A Australia
- Status: offline
RE: Parts wanted
2011/04/14 22:47:26
(permalink)
Is it for an escos or a sierra.? one up under the dash or in the console?
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/04/15 08:49:13
(permalink)
Sierra mate, the one that sits directly under the head unit. 
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/04/15 08:54:25
(permalink)
I'm also after some touch up paint.
The car is black, paint code A9. Does anyone know whether you can get this made up locally at any Autobarn, Australian Ford dealership or do I need to get something from the UK?
Cheers, Paul.
|
LINCOLN
Aficionado
- Total Posts : 345
- Scores: 0
- Reward points: 2155
- Joined: 2011/08/01 11:02:49
- Location: Melbourne Victoria Australia
- Status: offline
RE: Parts wanted
2011/04/15 08:59:11
(permalink)
Will ask mate Paul about paint.
|
rudeboy
Enthusiast
- Total Posts : 107
- Scores: 0
- Reward points: 2514
- Joined: 2011/08/01 11:02:49
- Status: offline
RE: Parts wanted
2011/04/15 20:17:33
(permalink)
If in Melbourne ...
Near the Ford factory in Campbellfield (on the opposite side of the Hume Hwy is a Ford spares and PPG Body shop ... they matched my Moonstone Blue very well.
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/04/15 21:17:17
(permalink)
Thanks mate, but unfortunately I'm in Brisbane :)
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/04/18 08:44:21
(permalink)
Found a set of repeaters here:
http://www.part-box.com/ford-sierra-cosworth-lamp-indicator-side-repeater-p-20108.html
Found a couple of amps on UK Ebay but would prefer to get one locally if anyone knows of a decent one lying around somewhere.
|
Mk1 Lotus
Supporter
- Total Posts : 204
- Scores: 3
- Reward points: 2811
- Joined: 2011/08/01 11:02:49
- Location: Sydney Australia
- Status: offline
RE: Parts wanted
2011/04/18 19:20:39
(permalink)
I was luck enough to buy new front and side blinkers, a while ago now though.
I also need an a radio and amp, bought off ebay UK all looked good till I got to the wiring plug[V]
|
ossie cossie
Enthusiast
- Total Posts : 155
- Scores: 0
- Reward points: 3002
- Joined: 2011/08/01 11:02:49
- Location: perth W A Australia
- Status: offline
RE: Parts wanted
2011/04/18 20:56:04
(permalink)
I have some standard ford radios and connector plugs in my garage. I am not back in Perth till Tuesday evening so i can post some pics up if you want?
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/04/18 20:59:49
(permalink)
I have the radio but no connector plug so that might come in handy.
Paul.
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/05/05 10:36:41
(permalink)
Finally got around to getting some touch up paint. Surprisingly the local auto paint shop had the paint code on file and just made me up spray can on the spot. Wasn't too hard as the A9 code turned out to be straight black tinter.  Only using it for a couple of very small stone chips so I wasn't too concerned about colour matching the 25 year old paint. Still chasing that elusive amplifier.
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/05/12 20:30:11
(permalink)
Well I finally got my new side repeaters. Unfortunately they are the later model ones that twist in rather than clip in, aaarrrrggghhh!!
Can't seem to find any early model amber ones, anyone know where I might get some?
|
ossie cossie
Enthusiast
- Total Posts : 155
- Scores: 0
- Reward points: 3002
- Joined: 2011/08/01 11:02:49
- Location: perth W A Australia
- Status: offline
RE: Parts wanted
2011/05/13 21:26:52
(permalink)
TCR, what kind of connector do you need for the radio?
|
TCR
Enthusiast
- Total Posts : 179
- Scores: 0
- Reward points: 1314
- Joined: 2011/08/01 11:02:49
- Location: Brisbane Australia
- Status: offline
RE: Parts wanted
2011/05/14 19:48:53
(permalink)
Just the wiring loom that connects the factory amplifier and head stereo.
|