Go back to home

RS2000 Escort Unfinished Project. Loads of Parts!

Author
DR0666
Enthusiast
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2011/08/01 11:02:49
  • Location: Mildura Vic Australia
  • Status: offline
2011/01/30 13:52:25 (permalink)
0

RS2000 Escort Unfinished Project. Loads of Parts!

Hi, up for sale is my unfinished RS2000 2 door coupe project.
It is not an original chassis, but all parts have been removed from the written off original. Including the I.D. plates if required..
The shell itself has been stripped back to nothing(no windows, dash, steering column, door handles or interior) to start the ground up rebuild. I have 4x F90 15inch gold Simmons rims, Original front rubber nosecone and bonnet, orig boot lid and rubber wing(Good Condition), 2x orig cracked dash pads, orig rs2000 instrument cluster, orig steering wheel, orig recovered recaro front seats, recovered rear seats, orig glovebox, orig console. Adjustable brake bias peddle box, tramp rods, disc brake rear brakes, vented front discs, 25mm front sway bar and anti dive kit, WRC crossmember, adjustable strut tops, strut brace, quick rack steering rack, NEW lower ball joints.
I have one 2.0l pinto that has been rebuilt to a stage 3 engine and never been fired. Also have another 2.0l pinto that has done approx 10000km that is fully worked. It has five angle seats on the valves, extensive custom porting(40 hours worth), Bob Holden ground cam(3500rpm-9000rpm, 600-650 thou lift), camtech extended pad rockers, 60 thou oversize pistons with molly top ring, lightened and shotpeaned rods, nitrided, lightened and balanced crank, lightened flywheel. A set of brand new 42mm side draft webbers and manifold jetted to suit a high perfomance engine. 2x sets of extractors(1 brand new). I have 4x single rail 4 speed g/boxes, 1x 5 speed sierra single rail g/box and 1x 4 speed cortina top loader g/box. I also have a Cosworth twin cam head (complete with valves, springs, followers, cams, timing gears, rocker cover, timing belt), that inlcludes inlet maifold and 3 piece extractors. Also have a small GT16 garrett turbo(needs an oil seal).
Things that are NOT included with the car but will be needed are a wiring loom, Radiator, brake lines, fuel tank and lines, roof lining, carpet, front windscreen and some rubbers and nuts and bolts.
Genuine inquiries and offers only please. $6,000
Please call or text Damien at 0412290425 or email to redsone666@ncable.com.au
Will email photos on request
#1


1 Reply Related Threads

    trocseSR
    Enthusiast
    • Total Posts : 10
    • Scores: 0
    • Reward points: 3159
    • Joined: 2011/08/01 11:02:49
    • Location: perth west australia Australia
    • Status: offline
    RE: RS2000 Escort Unfinished Project. Loads of Parts! 2011/03/16 12:09:37 (permalink)
    0
    hi,would you consider selling as parts seperately?
    #2
    Jump to:
    © 2025 APG vNext Trial Version 5.1