Go back to home

Escort mk1 arched shell/cosworth project for sale

Page: 12 > Showing page 1 of 2 - Powered by APG vNext Trial
Author
nigel mk1
Enthusiast
  • Total Posts : 284
  • Scores: 0
  • Reward points: 2995
  • Joined: 2011/08/01 11:02:49
  • Location: Melbourne Victoria Australia
  • Status: offline
2011/01/16 21:28:40 (permalink)
0

Escort mk1 arched shell/cosworth project for sale

Rust free 73 build escort automatic (large tunnel shell)
Most of the body is in bare metal, no surprises!
Engine bay in primer
rust free coupe doors ( they line up and gap very well)
heater bubble replaced with fibreglass item, bolt on/removable
Steel bonnet and boot, very straight, no rust, both painted in 2pac white
Fibreglass front twin cam guards, comes with glass arches to be bonded on.
Tubbed rear inner guards
Expressed panel steel rear arches (same ones used by Gary at Retromotorsport)

Front end
Shortened capri struts (shortened approx 50mm)
Converted to coilovers with 150mm sleeves, 2.25 spring seats
Celica adjustable koni's, machined top of shaft to suit noltec strut mounts
noltec adjustable camber/caster plates (new)
new tcas, nolathane bushes
Hopper stoppers 305mm brake kit, new discs/calipers/lines etc (engineers love this stuff)
World cup cross member, fitted with rubber bushes from mk1 leaf springs
Brand new engine mounts to suit WCXM cosworth 2l/pinto, (new)
You can fit a cosworth alloy sump without modification with these mounts/x-member
'Green' tie rod ends to suit capri struts with mk2 rack

Rear end
Hilux Diff with falcon 5 stud
Housing has been narrowed to standard escort diff width
4.3 ratio locked centre
Disc brake conversion on rear
Steel rear turret kit (round/gp4 type) - not fitted

Comes with all glass, including pop-out rear windows with hinges (pretty rare)
6 dial dash
Lots of new seals, doors, bailey channels, chrome locking strips etc
Comes with spare doors, spare bubble arch front guards (steel guards/glass archs bonded on)
theres a whole lot of other stuff as well...

Really only selling the chassis but if you are interested in the cossie motor and cossie t5 box/clutch/turbo and manifold etc just email me (Wont be selling the cossie stuff without selling the body first)

$3500 or make an offer
car is in SE suburbs Melbourne

njremedios@gmail.com

#1


16 Replies Related Threads

    MkI_JeT
    Enthusiast
    • Total Posts : 44
    • Scores: 3
    • Reward points: 4123
    • Joined: 2011/08/01 11:02:49
    • Location: Geelong Vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/17 01:15:56 (permalink)
    0
    DONT DO IT[8~2]
    #2
    Juiceman
    Aficionado
    • Total Posts : 650
    • Scores: 6
    • Reward points: 3467
    • Joined: 2011/08/01 11:02:49
    • Location: Brisbane Queensland Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/17 08:42:06 (permalink)
    0
    $3500? That's cheap as! Do want! Do already have 2 cars though...[8~2]
    #3

    GeoffWade
    Supporter
    • Total Posts : 308
    • Scores: 0
    • Reward points: 2266
    • Joined: 2011/08/01 11:02:49
    • Location: Narre Warren Vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/17 18:24:56 (permalink)
    0
    Nigel,
    I am gutted to hear this. It was your baby.
    Why ?????????
    #4
    nigel mk1
    Enthusiast
    • Total Posts : 284
    • Scores: 0
    • Reward points: 2995
    • Joined: 2011/08/01 11:02:49
    • Location: Melbourne Victoria Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/17 23:07:06 (permalink)
    0
    Geoff, you and Shaun know what this car means to me, i wish i could finish it, i have heaps of ideas and there were i few things i would like to have done that i haven't seen before on Escorts but to be honest i have just lost motivation. I have the money to finish it, just dont know if i can justify spending the cash to build to the standard that i want.

    Just got promoted at work, so have to make place for a new company car, and after doing the engine conversion on my beemer i realised that i dont need massive power to have fun, although it helps!

    Maybe revisit it in 10 years, but most likely that mk1 coupes will be stupidly priced by then!...


    #5
    nigel mk1
    Enthusiast
    • Total Posts : 284
    • Scores: 0
    • Reward points: 2995
    • Joined: 2011/08/01 11:02:49
    • Location: Melbourne Victoria Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/17 23:28:40 (permalink)
    0
    All emails replied to
    To those that wanted pics and info:

    http://classic-ford.org/forum/topic.asp?TOPIC_ID=10915&whichpage=10


    Rough specs on cossie:

    bd10cams
    lightly ported/cleaned up head
    200 motorsport block
    6 long studs (need to be fitted)
    standard rods/pistons
    *engine is currently dissasembled

    cossie t5 box
    standard flywheel x2
    flywheel to suit 7.25in clutch
    few standard clutches

    engine has all manifolds
    sierra t3 turbo
    3inch stainless dump pipe

    factory cossie ecu
    stage3 chip
    green injectors x4
    grey injectors x4 (cleaned)

    If you buy the lot ill also throw in the autometer 6 dial dash.
    Theres a lot more stuff too..

    Regards
    Nigel
    #6

    KIZZA
    Aficionado
    • Total Posts : 471
    • Scores: 0
    • Reward points: 4135
    • Joined: 2011/08/01 11:02:49
    • Location: melbourne vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/18 16:29:50 (permalink)
    0
    As mentioned on the phone last night Nigel, dad is keen and we are looking forward to coming for a look. Speak to you soon Cheers
    #7
    escortinadriver
    Deity
    • Total Posts : 1278
    • Scores: 115
    • Reward points: 6097
    • Joined: 2011/08/01 11:02:49
    • Location: Vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/18 19:09:05 (permalink)
    0
    For anyone considering this, it is an absolute steal.

    If I wasn't getting married in 3 months it would be mine.[8~2]

    Nigel is a perfectionist, (it is part of his job) and the quality of his work reflects this.

    Really hope this goes to someone who can finish the car to the standard it deserves.

    Best of luck with the sale.

    Nige, I'll be in touch over a few of your other spares....[:I]

    Have you still got my block sitting around???

    Shaun
    #8
    dominic_au
    Enthusiast
    • Total Posts : 20
    • Scores: 0
    • Reward points: 3235
    • Joined: 2011/08/01 11:02:49
    • Location: Blue Mountains NSW
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/18 19:50:14 (permalink)
    0
    Hi Nigel,
    shame about the sale. What are you planning on doing with the BBS wheels? If your keen to sell them I would be interested in buying.
    #9
    nigel mk1
    Enthusiast
    • Total Posts : 284
    • Scores: 0
    • Reward points: 2995
    • Joined: 2011/08/01 11:02:49
    • Location: Melbourne Victoria Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/18 23:16:14 (permalink)
    0
    Shaun thanks for the nice words. I do indeed have your block and a few other bits (pinto oil pump and pickup pipe). Come visit in a few weeks... or after the honeymoon when youre allowed to buy stuff again [:p]

    Dominic, i was thinking of keeping them as they are tricky to come by. They are 5x114.3 (falcon/nissan) pattern if that suits you? I will contact you once ive sold the rest. Also have lots of spare hoops to go with.

    Kieran, look forward to seeing you and your father this weekend, you guys are the lucky first ones to come look

    nige.
    #10
    sideways_rob
    Enthusiast
    • Total Posts : 8
    • Scores: 0
    • Reward points: 2176
    • Joined: 2011/08/01 11:02:49
    • Location: Melbourne Vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/19 03:30:51 (permalink)
    0
    Hey nige how r u mate?

    Sorry to hear the project is coming to an end.
    Just want to get my foot in the door if the cossie doesn't go with the car.. Could u pm me a ball park figure so I know how much to start saving haha. My missus will kill me regardless...
    #11
    KIZZA
    Aficionado
    • Total Posts : 471
    • Scores: 0
    • Reward points: 4135
    • Joined: 2011/08/01 11:02:49
    • Location: melbourne vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/19 15:45:07 (permalink)
    0
    quote:
    Originally posted by nigel mk1

    Kieran, look forward to seeing you and your father this weekend, you guys are the lucky first ones to come look

    nige.


    Cheers Nigel, its appreciated mate, see you Saturday.
    #12
    cossie86
    Enthusiast
    • Total Posts : 22
    • Scores: 0
    • Reward points: 607
    • Joined: 2011/08/01 11:02:49
    • Location: Melbourne Vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/22 17:09:50 (permalink)
    0
    Mate i'd be Sorry to see it go Nigel.

    Any takers as yet?

    Cheers

    Rich
    #13
    KIZZA
    Aficionado
    • Total Posts : 471
    • Scores: 0
    • Reward points: 4135
    • Joined: 2011/08/01 11:02:49
    • Location: melbourne vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/22 18:52:03 (permalink)
    0
    quote:
    Originally posted by cossie86

    Mate i'd be Sorry to see it go Nigel.

    Any takers as yet?

    Cheers

    Rich


    Yep
    #14
    cossie86
    Enthusiast
    • Total Posts : 22
    • Scores: 0
    • Reward points: 607
    • Joined: 2011/08/01 11:02:49
    • Location: Melbourne Vic Australia
    • Status: offline
    RE: Escort mk1 arched shell/cosworth project for sale 2011/01/22 19:04:05 (permalink)
    0
    Cool nice one

    look forward to seeing what you and your dad do with it.


    Rich
    #15
    Page: 12 > Showing page 1 of 2 - Powered by APG vNext Trial
    Jump to:
    © 2025 APG vNext Trial Version 5.1