Go back to home

Falcon rear end conversion

Author
Post
Essentials Only Full Version
tex_f
Enthusiast
  • Total Posts : 28
  • Scores: 0
  • Reward points: 1803
  • Joined: 2011/08/01 11:02:49
  • Location: sale victoria Australia
  • Status: offline
2010/09/29 22:22:11 (permalink)
0

Falcon rear end conversion

Curious, what model falcon is best suited for the rear end to come from?
#1


3 Replies Related Threads
    muzza
    Enthusiast
    • Total Posts : 246
    • Scores: 0
    • Reward points: 1181
    • Joined: 2011/08/01 11:02:49
    • Location: Sydney NSW Australia
    • Status: offline
    RE: Falcon rear end conversion 2010/11/10 23:29:33 (permalink)
    0
    I Believe the XF falcon had a Watts Link rear with LSD, better confirm that though! oh and the ratios will be around 3.20:1 which would be a bit low.
    #2
    eScoRt20
    Enthusiast
    • Total Posts : 97
    • Scores: 0
    • Reward points: 0
    • Joined: 2011/08/01 11:02:49
    • Location: Melville WA Australia
    • Status: offline
    RE: Falcon rear end conversion 2010/12/10 00:05:38 (permalink)
    0
    dont get a borg warner style diff if you want to swap ratios often. i did, and i regret it. i should have got a hilux diff, as they are basicly the same as a 9inch, so easy to have another ratio set up on the shelf. borg warner to swap ratio you need to re-set pinion height, pre-load, and all that other stuff.
    #3

    KIZZA
    Aficionado
    • Total Posts : 471
    • Scores: 0
    • Reward points: 4135
    • Joined: 2011/08/01 11:02:49
    • Location: melbourne vic Australia
    • Status: offline
    RE: Falcon rear end conversion 2010/12/10 16:12:17 (permalink)
    0
    Xf only had 25 spline axles, better off with a later model with 28 spline and its easier to hook up an EL handbrake as it pulls inwards where as my ED handbrake pulls forward which made it abit trickier to hook up but not impossible.
    #4
    Jump to:
    © 2025 APG vNext Trial Version 5.1