Go back to home

FYI- v6 stroking

Author
Post
Essentials Only Full Version
hotboostgt
Aficionado
  • Total Posts : 532
  • Scores: 4
  • Reward points: 5440
  • Joined: 2011/08/01 11:02:49
  • Location: nth brisbane qld Australia
  • Status: offline
2010/07/29 22:15:02 (permalink)
0

FYI- v6 stroking

As I spend hours on the net looking at options of different carb/throttle body setups .I stubbled across this article.

http://www.fordescortclubsa.com/phpBB3/viewtopic.php?f=26&t=276
Bit of light reading ..
#1


1 Reply Related Threads
    Wozzah
    Aficionado
    • Total Posts : 453
    • Scores: 10
    • Reward points: 3886
    • Joined: 2011/08/01 11:02:49
    • Location: Colac Vic Australia
    • Status: offline
    RE: FYI- v6 stroking 2010/07/29 22:43:28 (permalink)
    0
    There are a number of parts you can utilise from the Australian stuff too.

    I have used Falcon 4.0 rods and falcon x-flow pistons modified to fit the V6. Basically you can offset gring the crank to stroke it or de-stroke it. There are a number of Falcon X-flow pistons of varios dish sizes to acheive almost any comp ratio you please, and you can use EA-EL rods, or the longer AU rods.

    The pistons need to have valve reliefs machined in, and there are a number of other small mods to make it work, but you end up with basically any capacity engine you please and alot lighter, stronger engine internals.

    Cheers
    Woz
    #2
    Jump to:
    © 2025 APG vNext Trial Version 5.1