Go back to home

Will these wheels fit my bubble arch mk1

Author
Post
Essentials Only Full Version
nardo
Enthusiast
  • Total Posts : 97
  • Scores: 0
  • Reward points: 0
  • Joined: 2011/08/01 11:02:49
  • Location: Sydney NSW Australia
  • Status: offline
2010/10/06 11:16:23 (permalink)
0

Will these wheels fit my bubble arch mk1

Will these wheels fit my bubble arch mk1

The wheel sizes are:
2 wheels 13" X 10" (rear)
2 wheels 13" X 8 1/2" (front)

Inner offsets are:
2 wheels have offsets of 142mm
2 wheels have offsets of 118mm
Measured from the inside of the centre hub to the
outside of the outer hub.
#1


5 Replies Related Threads
    Mickas
    Aficionado
    • Total Posts : 624
    • Scores: -38
    • Reward points: 757
    • Joined: 2011/08/01 11:02:49
    • Location: Gold Coast Queensland Australia
    • Status: offline
    RE: Will these wheels fit my bubble arch mk1 2010/10/06 13:40:23 (permalink)
    0
    By the nil response to your last post I suggest this is the only reply to this post.
    #2
    Bloodyeck
    Enthusiast
    • Total Posts : 223
    • Scores: 0
    • Reward points: 729
    • Joined: 2011/08/01 11:02:49
    • Location: DARWIN NT Australia
    • Status: offline
    RE: Will these wheels fit my bubble arch mk1 2010/10/06 16:18:19 (permalink)
    0
    The rears probably won't fit unless you shorten the diff assembly. If you are intending to register the vehicle then forget wheels that wide. You will most likely not legally get away with wheels anything more than 50mm wider than than the standard wheels fitted to the vehicle.
    #3

    ossie cossie
    Enthusiast
    • Total Posts : 155
    • Scores: 0
    • Reward points: 3002
    • Joined: 2011/08/01 11:02:49
    • Location: perth W A Australia
    • Status: offline
    RE: Will these wheels fit my bubble arch mk1 2010/06/13 20:58:19 (permalink)
    0
    does that mean if i have 8 inch wide wheels as standard i can legally go to 9 inch wide. sorry to steal your thread.
    However here is a pic from a uk site, it has 10 inchers on.
    #4
    JordyCharlieBoz
    Enthusiast
    • Total Posts : 254
    • Scores: 0
    • Reward points: 965
    • Joined: 2011/08/01 11:02:49
    • Location: Baranduda Victoria Australia
    • Status: offline
    RE: Will these wheels fit my bubble arch mk1 2010/06/13 21:09:21 (permalink)
    0
    Ick they look like they should be on something from jap land. Stretched rubber just doesn't look right.
    #5
    Bloodyeck
    Enthusiast
    • Total Posts : 223
    • Scores: 0
    • Reward points: 729
    • Joined: 2011/08/01 11:02:49
    • Location: DARWIN NT Australia
    • Status: offline
    RE: Will these wheels fit my bubble arch mk1 2010/06/22 13:45:54 (permalink)
    0
    I have a couple of mates in the UK and they tell me you can practically get away with anything over there. Read the standards that apply in your state; adopt them and you won't have trouble with the law. If you want to get away with anything, move to South Australia. You can pass rusty vehicles off as rust free and even use coke cans to join the exhaust together and still get the thing registered.
    #6

    Jump to:
    © 2025 APG vNext Trial Version 5.1