Go back to home

spluttering

Author
Post
Essentials Only Full Version
cjdeane10
Enthusiast
  • Total Posts : 128
  • Scores: 0
  • Reward points: 987
  • Joined: 2011/08/01 11:02:49
  • Location: Armadale WA Australia
  • Status: offline
2010/05/25 15:17:24 (permalink)
0

spluttering

the low down;
new plugs, new oil, bit of a tune up (idling a bit low).
took dissy apart - to fit ingintion module (ignitor) - wrong one (gotta go back and get a differnt one), so i put the old stuff back in...

what happens;
starts better
at acceleration its better
at cruising its spluttering, (between 1500 and 3000 revs) like there is some mis-fire... bloody rough to drive (especially in traffic)

what's tested / new;
new plugs
new lead from coil to dizzy
checked all the leads for spark - OK


Any idea why? is it more likely electical timing? leads? coils?
#1


3 Replies Related Threads
    Mickas
    Aficionado
    • Total Posts : 624
    • Scores: -38
    • Reward points: 757
    • Joined: 2011/08/01 11:02:49
    • Location: Gold Coast Queensland Australia
    • Status: offline
    RE: spluttering 2010/05/25 15:49:41 (permalink)
    0
    poo in carby
    #2
    martymexico
    Deity
    • Total Posts : 2441
    • Scores: 286
    • Reward points: 5832
    • Joined: 2011/08/01 11:02:49
    • Location: Adelaide Sth Aust Australia
    • Status: offline
    RE: spluttering 2010/05/25 20:47:26 (permalink)
    0
    Check your idle jets and main jets for blockages and gunk. idle jets are on the side of carb (2ltr weber etc) and mains are at the base of the float bowl. Or you might have put the dizzy back in 1 tooth out, use a timing light and adjust as required
    #3

    cjdeane10
    Enthusiast
    • Total Posts : 128
    • Scores: 0
    • Reward points: 987
    • Joined: 2011/08/01 11:02:49
    • Location: Armadale WA Australia
    • Status: offline
    RE: spluttering 2010/05/25 21:20:03 (permalink)
    0
    ran some carby cleaner through the FoMoCo standard poo carby. no descernable change. just want to keep it going til i can change over to the weber.

    getting the timing checked tomorrow.

    thanks for the input guys.
    #4
    Jump to:
    © 2025 APG vNext Trial Version 5.1