Project 300rwkw...

Last time round the aim was 300kw at the flywheel...now for 300kw at the rear wheels[:u][%]

So Phil, which runway are u using to taxi and take off on.[88]

Lookin good my friend

quote:

---

Originally posted by Smcka
[br]
uuum... what are we looking at???[xx(]

---

Its a 550hp GT30R[;^)]

quote:

---

Originally posted by nigel mk1
[br] 300 at the treads on a stock motor with a gpA gasket. Cosworth, awesome.

---

We'll soon know if its possible[:p] Dont forget clapped out with heavy blow by and headgasket leaking coolant into cylinders[:u][(#)]

Last time I did an oil change, the engine had sat for a few weeks. When I removed the sump plug about 500ml of coolant ran out before the oil[:u][(#)] And then it ran a 12.2@116.5mph[(#)]

They are one tuff motor[;^)]

I have everything ready for the rebuild so I might as well see how far I can push it[:p]

Crazy b@stard [(#)]
That will be so awesome.

quote:

---

Originally posted by maxrs
[br]I hope that snails not from a Datto 120Y?
You can't beat a few CC's under your belt as well[;^)]
Feel free to post a video of the 12.2 second run.
Gezz that's hauling for a four.

---

I didn't have the camera out for the 12.2sec run but here's one that was prepared earlier[;^)]

Great stuff Phil. Thanks.
The Nostalgia boys run a little NOS out of the hole to stop the Turbo lag.
Have fun blowing it up[:x)]

Phil. i just fitted a gt30r to my rs500 integrale wastegate. i made 400bhp to the wheels on 29psi that was spiked then boost tapered off to 24psi. next run i will be hitting 36psi!!! on pump fuel

THAT was just replacing the standard t4 and fitting the turbo.
im waiting for my dyno tuner to get a program to re tune my webber pectal board ecu. i will let you know the result.

Good choice in turbo for a standard engine!!!! you will still have lag.. probably the same sort of lag a standard t03 engine gives!! which isnt bad considering the final power output!

Good luck with it! hopefully you can get the power desired easily!