Go back to home

MK2 Escort intercooler fitment

Author
Post
Essentials Only Full Version
ratta tat tat
Supporter
  • Total Posts : 1633
  • Scores: 39
  • Reward points: 5492
  • Joined: 2011/08/01 11:02:49
  • Location: Brisbane
  • Status: offline
2016/11/07 20:27:22 (permalink)
0

MK2 Escort intercooler fitment

Hi guys

I have a pinto turbo going into MK2 Escort coupe. I want to use a high performance 2 row radiator core (brass & copper) , it's a Redback brand and they're reputed to be just as good as a triple row core. This will allow more room for the intercooler.

I have done lots of measuring and there is some room behind the grille to squeeze an intercooler in but it can't be more than 50mm thick if I plan on keeping the stock radiator position. ALSO, I'm retaining the factory brake booster and bracket so the Airtec/ Radtec products will not fit.

Ideal dimensions would be 400mm wide, 200mm high and as mentioned 50mm thick. This means a custom radiator because all other options, off the shelf (ebay etc) are either too thick or too small (pressure drop)

PWR, 68mm thick

http://www.ebay.com.au/it...ame=STRK%3AMEBIDX%3AIT

Leaning towards this one, Delta design,50mm thick but not very high which may cause substantial pressure drop.
http://www.ebay.com.au/it...ame=STRK%3AMEBIDX%3AIT

Bar & plate but it's 65mm thick
http://www.ebay.com.au/it...ame=STRK%3AMEBIDX%3AIT



Can anyone post up some pictures to show how they went about fitting an intercooler with factory radiator & brake booster ??

Cheers!
#1


8 Replies Related Threads
    PeterM
    Master
    • Total Posts : 933
    • Scores: 34
    • Reward points: 4984
    • Joined: 2011/08/01 11:02:49
    • Status: offline
    Re: MK2 Escort intercooler fitment 2016/11/08 07:44:45 (permalink)
    0
    Firstly, if your car is primarily a street car why fit an intercooler?
     
    If space is an issue have you thought about fitting a charge cooler with ducting between the cam cover and the inlet manifold.
    #2
    ratta tat tat
    Supporter
    • Total Posts : 1633
    • Scores: 39
    • Reward points: 5492
    • Joined: 2011/08/01 11:02:49
    • Location: Brisbane
    • Status: offline
    Re: MK2 Escort intercooler fitment 2016/11/08 21:54:00 (permalink)
    0
    Hi Peter. It will be street and strip. I do like to push my cars, a lot, sometimes :D
     
    I have looked at the PWR barrel cooler kits. Plenty of room for one under the inlet manifold but the kit is a couple of grand and being water/air cooling will be a bit more complicated to install. The gap between motor and radiator is tight so getting the pipe from turbo to the barrel then to the inlet may prove more difficult than fitting an air to air.
     
    I have bought the 450x180x50 Delta
    #3

    80ESKY
    Aficionado
    • Total Posts : 59
    • Scores: 8
    • Reward points: 4017
    • Joined: 2013/04/28 11:18:26
    • Status: offline
    Re: MK2 Escort intercooler fitment 2016/11/09 09:54:51 (permalink)
    +1 (1)
    Sorry to come in late after you have purchased, but for anyone else interest I just finished going through this process too. With the limited space we could only use a 50mm thick intercooler and couldn't find one anywhere in the country to the size we wanted.
     
    In the end I ordered an intercooler core from Bell Intercoolers in the USA http://bellintercoolers.com/ All their cores are bar & plate style which was exactly what we wanted. The fabricator made his own tanks to suit our setup.
     
    Best to ring them direct when ordering, I rang them around 4 in the morning which was around midday their time. Very good service, prices similar to what we pay here but freight was a killer.

    @mrcossie
    #4
    ratta tat tat
    Supporter
    • Total Posts : 1633
    • Scores: 39
    • Reward points: 5492
    • Joined: 2011/08/01 11:02:49
    • Location: Brisbane
    • Status: offline
    Re: MK2 Escort intercooler fitment 2016/11/09 10:27:44 (permalink)
    0
    Thanks 80Esky. I'm glad to know I'm on the right track as far as measurements go so thanks for your input. Yes bar and plate is what I'd like to use too. I'll check out Bell and see what they can do. Cheers mate
    #5
    BUZ440
    Enthusiast
    • Total Posts : 106
    • Scores: 1
    • Reward points: 2205
    • Joined: 2013/06/21 20:29:48
    • Location: Brisbane
    • Status: offline
    Re: MK2 Escort intercooler fitment 2016/11/09 20:33:11 (permalink)
    0
    I'll have to show you mine on the Cortina Hayden

    NISROLA - 1976 KE30 Two Door

    BUZ440 - 1966 Mk1 Cortina

    Free yourself from engine racism!
    #6

    ratta tat tat
    Supporter
    • Total Posts : 1633
    • Scores: 39
    • Reward points: 5492
    • Joined: 2011/08/01 11:02:49
    • Location: Brisbane
    • Status: offline
    Re: MK2 Escort intercooler fitment 2016/11/09 23:32:50 (permalink)
    0
    That'll be great Carlos. Anytime mate just give me a hoy
    #7
    Guest
    Enthusiast
    • Total Posts : 37
    • Scores: 1
    • Reward points: 0
    • Joined: 2011/08/01 00:00:00
    • Status: online
    Re: MK2 Escort intercooler fitment 2021/07/18 20:36:08 (permalink)
    0
    Its getting to be a habit of mine bringing old threads back to life
     
    Hayden. I have started looking at fitment of radiator and A to A intercooler in the front of the MK2 Escort.
    (I got spoilt with the RS as there is a mile of room behind the nose cone)
    I have an old radiator which is a great side tank 4 core brass unit at 75mm thick. The intercooler is some 100mm thick (it was designed to go behind an RS nose cone). There ain't no way the two will go together and then to even think a thermo fan somewhere?
     
    I really don't want to go down the path of a water cooled intercooler so I am looking at mounting the intercooler lower down. As its a track car being built to sport sedan (Group 3D) specs I have to comply with, 'The front bumper and grill shall retain its original appearance and location in relation to the unmodified area of the coachwork down to the horizontal centreline of the front wheel hub.' This could be an issue I will try to get some clarification on the rule.
     
    Might have to look at an alternative (custom) intercooler?
     
    Any thoughts?
    #8
    Robbie
    Deity
    • Total Posts : 368
    • Scores: 56
    • Reward points: 3518
    • Joined: 2015/08/07 22:56:46
    • Status: offline
    Re: MK2 Escort intercooler fitment 2021/07/19 09:07:52 (permalink)
    0
    maybe reach out to the owner of this thread? im sure he is hiding a cooler in there and its very neatly done

    https://www.classic-ford....px?m=48366&mpage=6
    #9
    Jump to:
    © 2025 APG vNext Trial Version 5.1