Re: Rs2000 rear demister switch
2014/01/18 23:15:12
(permalink)
Thanks peter.
This confirmed for me that I needed to keep persisting.
After checking the wiring diagrams I have here, I could see that the rear demister relay (that I could clearly hear clicking when I turned the switch on), was meant to be delivering 12V+ to one side of the rear demister, AND to the +ve side of the bulb inside the switch at the same time. I knew that the rear demister was getting power, so the relay was fine.
A bit of fossicking around up under the dash revealed that I had neglected to plug back in the individual plug that delivered this power! (a grey connector). As soon as I plugged it in, everything worked as per normal.
Thanks again
Dave