Worked Pinto - Complete package (Perth)

Hi Guys,
Time has come to get cracking with my Duratec install, so up for sale is my pinto engine complete with everything I do not need to retain for the duratec conversion. This would be perfect for someone starting out a build from scratch and wanting to save on a lot of the hard work and time. The engine was built by the car's previous owner and he completed the build around 2006. Since then the car has had many spirited kms, but still pulls strongly and revs nicely. Specs of the engine i'm told are:
- Hepolite pistons 10.5:1
- Specco Blueprint camshaft ('street race' 4,000rpm - 7,500rpm powerband)
- Double valve springs
- Camtech followers
- Larger valves 44mm inlet / 38mm ext
- Professionally ported (both) and polished (exhaust only) head
- Balanced bottom end
- vernier cam wheel
- twin 45 Webbers
- ceramic coated Pacemaker extractors
- Lightened flywheel
Basically 95% of the ancillaries bolted on the engine which I dont need for the Duratec are included such as 4spd gearbox (HD clutch, quick shifter, also a spare second 4spd box), alternator, starter, dizzy, waterpump etc etc.
The engine is still in the car and I can show you it running, though I am aiming to remove the engine within the next few weeks. The engine has been serviced religiously. Like I said, the engine is not in new condition, a few minor items for the fussy buyer:
- there's a couple of very minor oil leaks around the sump/block
- there's the odd backfire that comes from the inlet side, which never bothered me or the previous owner
If you require I can probably put you in touch with the previous owner also, he does like to have a good yarn about his beloved escort!
Looking to sell everything complete and for offers over $2k.
Located in Perth.
Cheers, Aaron
0400788351