RS2000 Oil Pressure Fitting

I am assuming you have the original line and looking for the fitting that goes between the line and the block? If so, you may be able to pick one up from a speed shop. If i recall correct, the size going into the block is 1/4 ntp. I got one recently to hook up a aftermarket line and secondary electronic gauge.

I have a "T" piece that allows fitting of a mechanical pressure gauge and the std pressure switch. You can have it if it's what you need.

Cam

i used a Swaglok right angle fitting . 1/4npt thread with a 1/4" olive other end.

Don't reuse the collars that clamp the oil line under the olive.

Thanks Geoff Wade for sample. Off course mine was a different thread, got one turned up in lathe so all good.