Technical Information

To Bottom

Technical Information (p.8)
Post New Thread
Regular
rodford2000

ford escort mk2 rally pak

just picked up a rolling shell and suspect it might be a rally pak.obviously all good original parts like bumperettes ect have been removed probably long ago.any information on plate codes/chassis ect or general diffrences around body to distiguish or de code it so i know what it is.someone mentione..
6
2012/11/21 22:48:45
beshy642

Auto transmission hellppp

Hi guys I'm currently stuck with my auto trans atm I have a genuine rs2000 auto (c3) and im looking for something to replace it that can handle some hp does anyone know what the best option would be? And what would fit without much work? I'm wanting to keep it auto as there weren't many made any hel..

2012/11/04 21:26:07
griezy

tire sizing on a 6in dragway four spokes rim

hi guys, can some tell me if 185 x 55 or 60 x 14 would fit on a 6in rim reason im asking is because i bought brand new dragways four spokes for my mk2 escort van a few months ago and also bought 205 x 60 tyres for the front but havn't driven on them until today, as i was rebuilding the suspension wi..
3
2012/10/28 18:16:56
ESCORTWIL145

Windscreen wiper unit - Replacing Mk1 with Mk2 Escort

Hi guys, could someone help me out by putting a photo up of the wiper motor location and assembly of a Mk2 Escort (underside of the dash), I am replacing the Mk1 version with Mk2 and the mounting spots are completely different. I'm not sure where they are meant to be located under the dash. Changing..

2012/10/19 10:11:12
Polo

twin 40 side draught on pinto

ok ok i know some people will say 40's are two small on a pinto , but i also know there are alot of pinto's running 40's , just wanted to know what size chokes they are running , as it is a street car and with 40's i will have a bit more down low . Also what would be a good cam selection ??..
4
2012/10/18 00:02:17
karlyoung

Servo vacuum and throttle bodies

Planning a gsxr throttle body conversion on the pinto. Want to keep the brake servo. The gsxr throttle bodies have a vacuum take off on each port, I'm thinking of putting each one to a vacuum rail/collector with extra take offs for the map sensor and vac gauge and one larger one for the brake servo...
15
2012/10/07 18:35:32
davus

Original Engine Colors - Need help

Hi All, Even thought my restoration is going very slowly (i have three kids under 7!), the time has come to now repaint the engine. Its stripped down, cleaned up, and a few little mods done. Can someone please help me out with information relating to what the original colors of the engine are meant ..
12
2012/09/23 12:23:53
davus

How oversized are these oversized pistons???

Hi Guys, I have a bit of a problem, and im sure for someone it will be an easy question. Im not quite sure how to read the information on the top of piston in order to identify how "oversized" they are. I have two configurations to choose from. One: On the top of the piston it has "Top .04 WI", and..
2
2012/09/15 23:12:15
mead67

oil seperator

would anyone be able to shed any light on as to why my oil seperator keeps blowing off the engine, blloody came off today and hit the fan and smashed it to pieces. Cheers..

2012/09/14 18:26:54
karlyoung

carbon canister and piping to tank

I'm going EFI so am i right in thinking i can bin the carbon canister and piping? The emissions should be better than original any how. I also need a extra return to the tank for the swirl pot to vent to. Any one know where all the piping goes from around the filler neck? I've removed the guard and..

2012/09/11 13:17:58

<< ..7 8 9 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account