Technical Information

To Bottom

Technical Information
Post New Thread
Pinned
Admin

This forum will be turned off in the next 6 to 12 months

I will be turning off the server that runs this forum in the next 6 to 12 months. I run multiple discussion forums on it and since the introduction of Facebook Groups, usage of the forums has steadily decreased. The result of this is that revenue from Google ads no longer come close to covering the ..
35
2025/07/20 18:38:37
Regular
Koolminx

Mystery transmission

Mystery…. 71WC-7000 (KA) This transmission is a mystery to me can you help?..
1
2023/06/07 21:07:15
Ray561

escort MK2 dash light switch question

Just wondering why my dash-light switch on my Mk2 also has the symbol for fog, driving lights. thanks in advance. Raymond..
8
2022/05/23 10:29:05
MK1_Oz

Holinger SG Sequential

Anybody had any experience with the Holinger SG sequential 6-speed gearbox? Cannot find any reviews or comments on the interwebs........
3
2021/03/20 14:04:54
martymexico

Spigot/pilot bearing removal

Ok we all know the trick with Escort type spigot bearing removal, whether it be just demolish it and pull the remains out or go the pack it with grease and ram a metal bar thru to push the grease and bearing out (hydraulic method) ,bread, soap, playdough etc can do the same job. But when your pilot..
9
2021/01/04 16:57:38
MK1_Oz

Duratec 25

I am looking to take advantage of new rules and regulations in the tarmac rally world by building a N/A 2.4L Duratec. As has been done many times before I will use a 2.5L block, a 2.3L crank and 2.0/2.3L head to get the best capacity and revability/power. I have started looking around for a Durat..
9
2019/12/04 14:26:52
BEE VEE

POINTS VERSUS ELECTRONIC IGNITION

I have to smile when I read how many owners convert to CDI or even Electronic Ignition. (The ONLY reliable conversion I ever saw in my 50 years as a mechanic, was the Bosch Kit which is NLA). My 1978 XC 5,8 Falcon was the first ever Ozzie 351/5.8 to be factory fitted with Bosch EI (the 302/4.9 misse..
6
2019/08/14 22:22:25
smallp1967

LSD identification

Can anybody on here tell what these are and what they may fit please?. Many thanks,Paul..

2019/08/01 17:12:09
Suttonmotorsport

16mm front sway bar

Does anyone know where l can have a 16mm front sway bar made in oz or where l can purchase one locally? Thanks Craig..
4
2019/06/07 17:53:01
MK1_Oz

Pinto CAD Drawing

Does anybody have a CAD drawing of a 2L Pinto block that they are willing to share?..
6
2019/06/06 19:06:20

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account