Re: Alternator purchase (SW20TT)

Mon, 05 Jun 2017 08:16:06 GMT

I realise this is 4 year old post but thanks for posting this info. If you're still here.. how did you go with the aftermarket alternator?

I can also confirm, taking out the 100amp alternator was PITA FML

Re: Alternator purchase (HairyDave)

Wed, 09 Oct 2013 17:38:41 GMT

Well, finding a new 100 amp alternator for a 1990 3SGTE in Australia is highly unlikely. The Toyota Part number is:
27060-74180.
                                                                        Toyota                 Nippondenso        Lucas        Mack               PFI Unipoint
MR2 Turbo 100 Amp - Round Plug 27060-74180 100211-6110 A8765 A-ND13385 ALT 6205
MR2 Turbo 80 Amp - Oval Plug      27060-74430 101211-5460 A8785 A-ND13501 ALT 5091
MR2 Turbo 80 Amp - Round Plug    27060-74330 100211-6360 A8766 AT-00154R A-ND13525
MR2 Turbo 80 Amp - Round Plug    27060-74170 "100211-8060 100211-8380 100211-8381" A8764 A-ND13393 MR2 Turbo 80 Amp - Round Plug    27060-11060 "100211-8060 100211-8380 100211-8381" A8764 A-ND13393

For those of you that are interested, or find this kernel of knowledge in future years, the two most reputable points of purchase are;

MR2Ben in the UK
and
Rare electrical in the USA

I opted for a new unit from rare electrical in the US. The price was around $150 AUD and shipping (express) is about the same.
Now, to piece the puzzle back together.....Seriously, if this alternator fries before the engine has to come out, I am cutting a service panel (see large f**king hole) from the boot into the engine bay......

The only way to remove the 100 amp version is by removing the exhaust. You cannot tetris the damn thing out in any other direction. You also have to remove the triangular rubber block, held in by 2 x 12mm bolts. I found wearing a blindfold and using the force the best way of undoing those two.

Alternator purchase (HairyDave)

Sun, 15 Sep 2013 16:29:12 GMT

G'day fellow enthusiasts, I am in need of a new or reco alternator for a 1990 SW20 3SGTE. Advice on a reputable supplier would be greatly appreciated. I am residing in Canberra, so local would be good, but anywhere in Aus is fine. Thanks!