FCD 2nd gen 3sgte need help

Re: FCD 2nd gen 3sgte need help (Head gasket)

Thu, 04 Jul 2013 21:57:04 GMT

Alright I'll stick with the simple FCD thanks mate

Re: FCD 2nd gen 3sgte need help (just_ace)

Thu, 04 Jul 2013 21:41:41 GMT

Do not get an safc, they dont work well with 3sgte ecus.

Re: FCD 2nd gen 3sgte need help (Head gasket)

Thu, 04 Jul 2013 20:18:09 GMT

I've been doing a bit more reading and thought I'd ask seens though i can't find any info here....

I've read that a fella got the FCD installed but then later had an apex'i safcII installed ..
Does anyone know anything about these air flow controllers in an mr2 ( being a piggy back )
Should I buy one of these apex'i devices , it looks easier to adjust the FCD ?.

Re: FCD 2nd gen 3sgte need help (Head gasket)

Mon, 01 Jul 2013 08:57:11 GMT

thanks bud, looks like a good site to blow some hard earned..

Re: FCD 2nd gen 3sgte need help (asimovy)

Sun, 30 Jun 2013 23:32:56 GMT

It will be expensive to buy a HKS one, you can get a cheaper one here:
http://www.twosrus.com/catalog/product_info.php?products_id=283
If you don't have a boost gauge or boost controller you could get their package
http://www.twosrus.com/ca...05&products_id=385

or even build your own FCD if you have a soldering iron it's pretty easy and cost me about $10 in bits from Jay Car.
http://toymr2.tripod.com/fcd.html

Re: FCD 2nd gen 3sgte need help (Head gasket)

Sun, 30 Jun 2013 22:33:25 GMT

sweet and i can adjust as needed?

Re: FCD 2nd gen 3sgte need help (just_ace)

Sun, 30 Jun 2013 22:28:07 GMT

Buy a hks fcd. It splices into the map sensor wires before the ecu to adjust the signal.

FCD 2nd gen 3sgte need help (Head gasket)

Sun, 30 Jun 2013 22:12:57 GMT

wondering how to up the boost with out the fuel cut defender kicking in , i would like to keep it there but just raise boost ...