'Will it fit' thread #573

Re: 'Will it fit' thread #573 (D.J)

Wed, 17 Jul 2013 16:23:48 GMT

Not sure, probably on the inside of the guards. Would need flared at that ride height/camber.

Re: 'Will it fit' thread #573 (dylmrt)

Tue, 16 Jul 2013 15:31:05 GMT

Where's it scrubbing?

Re: 'Will it fit' thread #573 (D.J)

Tue, 16 Jul 2013 13:10:16 GMT

Ended up with works 17x7.5/8.5 rims.
Fronts scrub, rears sit pretty flush. Will need new suspension to sort it.

Re: 'Will it fit' thread #573 (Eric)

Fri, 28 Jun 2013 09:11:53 GMT

those will clear fine in the rear, will be about 20mm less than flush though

as for fronts, they may hit coilovers, so you may require a 2-3mm slip on

-Eric

Re: 'Will it fit' thread #573 (Cruiser97_80)

Thu, 27 Jun 2013 20:51:03 GMT

Lowered on coil-overs or lowering springs with the std. strut/spring perch?

Re: 'Will it fit' thread #573 (dylmrt)

Thu, 27 Jun 2013 14:15:58 GMT

on the face of things yes. but each wheel is different so you may still come across issues.

'Will it fit' thread #573 (D.J)

Thu, 27 Jun 2013 11:37:09 GMT

Lowered SW20 Gen II
Planning 17x8 +35's all round (not staggered boo). Will these fit fine or will will I need spacers, guard rolling etc.

Thanks.