WA (Perth): AW11 and a other random parts (will be updated as I get to stuff)

Re: WA (Perth): AW11 and a other random parts (will be updated as I get to stuff) (Engineering_guy)

Tue, 23 Apr 2013 23:04:09 GMT

Hey mate,
Any chance that you have a serious of door locks for an aw11?
Pm with details if so.
Thanks,
Mat

Re: WA (Perth): AW11 and a other random parts (will be updated as I get to stuff) (worldwalker)

Thu, 18 Apr 2013 21:08:09 GMT

RX7 cooler? Few bent fins, top side is fine.

"Custom" Cooler, welds look really good but I don't have the equipment to pressure test it.

T28 as described

WA (Perth): AW11 and a other random parts (will be updated as I get to stuff) (worldwalker)

Thu, 18 Apr 2013 16:56:02 GMT

Slowly clearing out my shed and garage as I finish off my MR2's. (Pictures to follow)

At this stage all I have is the following:

2 x Aw11 engine bay fans $10ea

2 old intercoolers, I can't verify any details of these as I've never used them.
What appears to be an RX7 intercooler $20

A "custom" intercooler someone has made from 2 smaller cores. $20

T28 from an R32 GTR... I'm sure it would still squeeze air but it's got a good half a mm of lateral and 1-1.5mm of longitudinal play. Blades look ok, but I can't guarantee it's not blowing smoke. $50? (Missing actuator and housing clamp). Probably still make a good GZE turbo.

Blitz WTA intercooler including heat exchanger and all piping to suit AW11 will come shortly.