FS - Fans, gen2 intake manafold, race car parts, sensors, blower fan ect.

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Thu, 04 Apr 2013 23:29:10 GMT

All items now sold.

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Wed, 27 Feb 2013 11:56:25 GMT

Temp sensor sold

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Sun, 03 Feb 2013 22:38:40 GMT

If you want to test if the switch is making your fans staying on, unplug the sensor, place a short bit of wire to make a short between the 2 pins on the connector on the loom, if the fans stops then yes the sensor is the fault.

PM sent.

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (Timbo)

Sun, 03 Feb 2013 21:23:15 GMT

Ill take the radiator fan temp sensor. Im hoping it will stop my fans running all the time since ive checked all the other ones.

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Sun, 03 Feb 2013 18:51:36 GMT

Anyone want any of this stuff? i have to clear it all out so let me know, or it will prob end up in the bin

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Sat, 19 Jan 2013 16:42:01 GMT

Heater hoses sold pending payment

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Sun, 06 Jan 2013 20:11:16 GMT

Updated prices. Any one any any of this?

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (Ant1)

Sun, 30 Dec 2012 23:22:01 GMT

Oh okay, I thought that might have been it and I snapped it today.

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Sun, 30 Dec 2012 22:59:22 GMT

No sorry, the radiator fan switch goes in the radiator itself, in the end tank on the drivers side.

Re:FS - Fans, heater hoses, gen2 intake manafold, race car parts, sensors, blower fan ect. (Ant1)

Sun, 30 Dec 2012 19:50:28 GMT

In that diagram you used for the hoses, does that fan temp sensor go at the top of where the long hose starts? If so i will take it.

FS - Fans, gen2 intake manafold, race car parts, sensors, blower fan ect. (WIDEMR)

Sun, 30 Dec 2012 18:08:01 GMT

FOR SALE

Few random parts that i no longer require, thought i would see if anyone else wants.

~~Radiator Fan Temp Switch~~ SOLD
USED BUT AS NEW - Brand new Genuine Toyota, was installed into brand new PWR radiator in the car and sat there for about 1 year, never had engine running, did have coolant in for a few weeks until was drained and engine removed.
~~Has some liquid thread sealant on the thread but will clean off fine.~~
~~To suit 1990 SW20 Turbo, unsure if other years or NA's had diff switch~~
http://www.bjrsecurity.com.au/forsale/radtempsensor1.jpg

~~Heater Hoses~~ SOLD
~~Was bought brand new from Toyota, got them from Aust not lithia so paid a premium exp the one with the heat shield and clamps, used for about 1,000 KM not even, very good condition, feels like new.~~
~~Dunno why but dosent appear to come up when i search in lithia.~~
~~Long one with the heat shield and clips over it~~
~~Shorter one~~
http://www.bjrsecurity.co.../heaterhose3.jpg
http://www.bjrsecurity.co...orsale/heaterhose1.jpg
http://www.bjrsecurity.co...rhose2.jpg

~~Radiator Fans~~ SOLD
~~Set of radiator fans, were at one stage disassembled, cleaned up and sprayed. Original connectors have been replaced by Deutsch DT 2 pin connectors. (I can help you out with matching connectors)~~
http://www.bjrsecurity.com.au/forsale/fans1.jpg
http://www.bjrsecurity.com.au/forsale/fans2.jpg
http://www.bjrsecurity.com.au/forsale/fans3.jpg

~~Gen2 Intake Manifold~~ SOLD
Was sand blasted, sprayed with a reflective silver paint, new badge and has vac ports replaced with -4 and -6 AN fittings. (If your not needing AN fittings, you can just use AN to barb adapters to go back)
Some of the AN flares have marks, however shouldn't be an issue. The CSI mount has a snapped bolts thread in it, it did run ok with just the 1, no fires however i would suggest to remove old and drill and tap new thread.
http://www.bjrsecurity.com.au/forsale/manafold1.jpg
http://www.bjrsecurity.com.au/forsale/manafold2.jpg
http://www.bjrsecurity.com.au/forsale/manafold3.jpg
http://www.bjrsecurity.com.au/forsale/manafold4.jpg
http://www.bjrsecurity.com.au/forsale/manafold5.jpg

~~Factory Blower Motor to suit race car~~ SOLD
Has heavy metal flaps, motors and arms that selected inside/outside air removed and replaced with carbon fiber, has a 3 1/2" outlet added on, the tape was to space it out as i had a 4" duct off it, the blower speed resistor has been removed from its original location, heater box? and located in this blower, with the power for the motor running through it to reduce speed, as was waaay to powerful without as was not restricted by aircon / heater elements, it also drops the current draw down.
~~Has crack on one side, was silicone over buy may need better fixing, however works fine.~~
~~To suit track/race car that wants to remove aircon and heather box and just duct of this to say centre vents.~~
http://www.bjrsecurity.com.au/forsale/blower1.jpg
http://www.bjrsecurity.com.au/forsale/blower2.jpg
http://www.bjrsecurity.com.au/forsale/blower3.jpg
http://www.bjrsecurity.com.au/forsale/blower4.jpg

~~Centre console with Carbon Fiber switch panel to suit race car~~ SOLD
~~Does NOT include switches or wiring or the blue battery isolation switch decal.~~
http://www.bjrsecurity.com.au/forsale/panel1.jpg
http://www.bjrsecurity.com.au/forsale/panel2.jpg

Item Location: Eastern Suburbs, Melbourne, Victoria
Shipping / Payments: Pickup from above location or can post at buyers cost. Payment can be Cash (if pickup), bank deposit or paypal.