Break pad help for 1992 Mr2 gt Turbo

Re:Break pad help for 1992 Mr2 gt Turbo (just_ace)

Sun, 02 Sep 2012 21:25:49 GMT

Build plate should have month and year.

The change in revision is either end of 91 sometime or start of 92, I cant remeber at this moment. But its always best to check the current rotors you have as with these cars and peoples mods, you may have bigger brakes on older cars, and sometimes for strange reasons the older brakes on newer cars.

Re:Break pad help for 1992 Mr2 gt Turbo (lovemyMR2)

Sun, 02 Sep 2012 19:51:44 GMT

How do I find out which month it was made in? I thought it was just the year that is shofw on the metal plate with all that information.

Is it under a diffrent heading?

Re:Break pad help for 1992 Mr2 gt Turbo (just_ace)

Sun, 02 Sep 2012 19:47:45 GMT

what month in 92 was your car made?

yes JDM and ADM have the same brakes.

92 is most likely a rev 2 so should be the larger brakes (92rev2-98rev5 all got the same brakes) JDM/ADM. but it's wise to check exaclty what rotr size you have first.

ps: don't look at the usdm references to sw20 models, that'll confuse you.

Re:Break pad help for 1992 Mr2 gt Turbo (lovemyMR2)

Sun, 02 Sep 2012 19:33:14 GMT

Also if it will help my mr2 is a JDM one.
Do the JDM, domestic and NA models have the same brakes.

Break pad help for 1992 Mr2 gt Turbo (lovemyMR2)

Sun, 02 Sep 2012 19:30:03 GMT

Hi guys I am after a new set of break pads for my MR2 Turbo 1992 model.

I have found these on Ebay just want to make sure that they will fit.
http://www.ebay.com.au/it...mp;hash=item1e71688913

Please assist.