https://www.classic-ford.org/mr2/mr2play/tm.aspx?m=79065(c) MR2 AUSTRALIA30 From memory the ZZW30 disc has a 55mm centre bore while our AW11 has a 54mm OD on the hub. Either way, you're doing some machining (good shops will be able to do a 1mm hub spigot ring, but it's -very- tricky).&nbsp;<br>&lt;3 for having custom hubs made with the correct offset!&nbsp;<br>https://www.classic-ford.org/mr2/mr2play/FindPost/79805Sat, 15 Sep 2012 11:06:57 GMT Does anyone know if the zzw30 rear disk and sw20 16mm caliper will fit the rear of an aw11? <br><br>I know that the late sw20 (22 mm) calipers are a bolt-up fit, and will work with aw11 front rotos with a spacer; but pacers are not legal here in vic.<br>I know that the same calipers will fit a renault 22mm disk without spacers, but the disk needs machining.<br><br>The zzw disk looks to have about the right offset (41.5mm), and is 16 mm to suit the early caliper; has anyone tried it? <br>https://www.classic-ford.org/mr2/mr2play/FindPost/79065Sat, 01 Sep 2012 21:10:40 GMT