Link g4 coil on plug conversion

Re: Link g4 coil on plug conversion (MCT_MR2)

Mon, 26 Feb 2018 21:46:07 GMT

I don't quite follow what you are trying to achieve, your question doesnt quite make sense.
But to answer the second part of the question:

IGT - ignition trigger (the signal from the ecu, to the ignition module)
IGF - ignition feedback (the signal from the ignitor, to the ecu, used for missfire detection)

If my guess is right, and you are trying to hook up the tacho, you will have a bit of trouble. The tacho needs to see the collapse of a magnetic field to activate (it a negative trigger)

To do this you need to set up a relay, to simulate this happening. Robk has done a writeup on it before on the forum, as have i. but basically you are looking to do this:

https://goo.gl/images/PF86gN

Re: Link g4 coil on plug conversion (Timclarkee)

Mon, 26 Feb 2018 21:01:52 GMT

Thanks mate!! Can anyone confirm which one it would be!?

Re: Link g4 coil on plug conversion (Mrskylighter)

Mon, 26 Feb 2018 20:39:21 GMT

There you go. The one on the top. would have to be either IGT or IGF?

Link g4 coil on plug conversion (Timclarkee)

Mon, 26 Feb 2018 20:04:57 GMT

Hi guys I have a link g4+ with a COP conversion kit (coil packs, mounts, Dissy block off and loom)

It’s all perfect except I need to plug a thin black wire that is in the link loom (RPM signal) into the standard Toyota plugs that go into the link ECU.

Can anyone PLEASE help with a pin out on the standard mr2 gen 3 3sgte ecu plug pin out and where I plug the link RPM sensor into the stock plug!
Please!!