Wolf 3D Problem

Re: (Supremacy)

Tue, 25 Apr 2017 16:25:12 GMT

Dyno tuning will be requured to ensure optimum performance. The main thing that would need to be checked is input and output configuration.

That software should allow you to jump online to the ecu and test outputs and inputs.

Re: (Timclarkee)

Tue, 25 Apr 2017 15:54:49 GMT

Supremacy
I would say that the configuration is incorrect for your gen3 if it ran on a gen 2. The looms have different pinouts between gen 2 and gen 3.

Thanks for the response guys, so dyno tuning the car and putting the proper gen 3 map in it should resolve the problem?

Re: (Carmikey)

Tue, 25 Apr 2017 00:18:08 GMT

^^spot on!

Sent from my SM-J320ZN using Tapatalk

Re: (Supremacy)

Mon, 24 Apr 2017 14:27:14 GMT

I would say that the configuration is incorrect for your gen3 if it ran on a gen 2. The looms have different pinouts between gen 2 and gen 3.

Wolf 3D Problem (Timclarkee)

Mon, 24 Apr 2017 13:11:31 GMT

Hey guys, recently plugged a wolf 3D ecu into my gen 3 3sgte, car previously runs on standard computer but now it only cranks and does not start with the wolf attached. Seems like there is no ignition or injection pulse, anyone have any ideas? Thanks
Also the wolf was previously running a gen 2 3sgte and I believe it still has that tune in it.
I just got an adaptor loom from EMS to attach it to my gen 3 harness