[QLD] FS: Cup Holders SW20 AW11 (3D Printed)

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Mon, 12 Mar 2018 22:37:42 GMT

Mrskylighter
These are great! Don't know how I did without one in my AW11.

Cheers Nick!

4 remaining now.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Mrskylighter)

Sun, 11 Mar 2018 20:19:29 GMT

These are great! Don't know how I did without one in my AW11.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Sun, 11 Mar 2018 12:58:39 GMT

Updated the first post.

I have 8 remaining from a previous batch.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (5SGTE)

Sat, 29 Apr 2017 15:36:43 GMT

Half day Friday, let's drive the fun car to work :-D

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Sat, 29 Apr 2017 14:57:54 GMT

Bump

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Sun, 12 Mar 2017 22:39:12 GMT

Shaz
It seems that different seats make a difference.
I was able to make use of one whilst driving RobK's fun car, but when I put it in my car it didn't quite work for me.
My passenger was able to make use of it this weekend tho. " />

Does that mean the factory leather seats are narrower than the fabric seats? That's good that the passenger was able to make use of it on the weekend!

Made up a white pair today to be posted to a member! Loving the contrast in colours, extremely clean.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Shaz)

Tue, 28 Feb 2017 21:03:33 GMT

It seems that different seats make a difference.
I was able to make use of one whilst driving RobK's fun car, but when I put it in my car it didn't quite work for me.
My passenger was able to make use of it this weekend tho. " />

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Tue, 28 Feb 2017 19:51:51 GMT

Time is flying by this year!

Big shout out to the QLD lads for taking the cup holders down to WP Challenge and a big thank you to all that bought one. Hope they are being put to good use.

Left overs from WP Challenge, made and ready to go: Orange, green, sea green and black.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Thu, 12 Jan 2017 11:22:17 GMT

Sending a box down to WP Challenge. Speak to Eric or Ben if you wish to check them out.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Fri, 30 Dec 2016 10:59:39 GMT

Eric has kindly offered to take a few down to the WP challenge. Good opportunity to save on postage cost.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Wed, 21 Dec 2016 22:29:05 GMT

Mrskylighter
My cup holder arrived in the mail today and it is a very impressive piece. I found in my AW11 series 2 (MK1b) it would attach to the door card anywhere I tried it. From right against the seat (slightly tighter fit) to down the other end near your foot (firm fit)

You should seriously consider making a lot more of these and perhaps have them distributed in the US/globally by https://twosrus.com

It's almost too nice to put a drink in it in case it spills.

Thank you for your kind words, Nick! I'm glad you are happy with the cup holder. I imagine the grey straps ties in well with your Recaros and the two tone exterior.

Update: 8 remaining. I updated the first post with what colours are still available.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Mrskylighter)

Wed, 21 Dec 2016 12:55:33 GMT

My cup holder arrived in the mail today and it is a very impressive piece. I found in my AW11 series 2 (MK1b) it would attach to the door card anywhere I tried it. From right against the seat (slightly tighter fit) to down the other end near your foot (firm fit)

You should seriously consider making a lot more of these and perhaps have them distributed in the US/globally by https://twosrus.com

It's almost too nice to put a drink in it in case it spills.

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Eric)

Thu, 15 Dec 2016 17:38:44 GMT

This product has changed my life! I keep walking to my car with drinks and going "oh damn, no cup holders!" - but then I keep remembering I have Joels cupholder!

I have a fixed back sparco mounted in my car and it clears fairly well, cups do interfere with my leg slightly though due to the seating angle

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Mrskylighter)

Wed, 14 Dec 2016 21:48:43 GMT

Lumix
Mrskylighter
These are great! Have they been tested on an AW11 series 2 door card?

The plastic part of the pocket they slip over looks to be very similar in thickness on the AW11.

Just a follow up. I retested and it fits AW11 series 2 door card. It's a perfect fit at end of the door card pocket and becomes a slightly tighter fit as you move back along the pocket towards the seat!

Great. thank you very much for confirming the fitment. I have sent you a PM to purchase one with grey material.
Cheers!

Re: [QLD] FS: Cup Holders SW20 (3D Printed) (Lumix)

Wed, 14 Dec 2016 16:49:24 GMT

5SGTE
Lol, these cup holders are a good reason to develop one...

Can't stop drinking chocolate frappes. Help.