FS: gt4 front caliper bolt on kit for AW11 (alec801)

Mon, 24 Oct 2016 11:05:51 GMT

This is an expression of interest.
I am considering changing my front brake setup if I am able to make back most of what I have spent on it.

I have:
- st205 gt4 4 pot front calipers
- OEM rebuild kit for the calipers
- brand new protex st205 rotor that has been resized, pcd changed and slotted.
- aw11 hub assembly with a 55mm bore (instead of 54mm bore. This suits the rotors perfectly).
- m12x1.5 threads have been pitched in the hub so you can bolt the calipers on.
- extended threads in the hub.
- used brake pads (PO got paint all over them but they can probably be reused)
- gt4 brake lines
- sw20 brake booster (i think some work needs to be done to fit this)

I am chasing $900 for everything.

This is pretty much everything you will need to use these brakes.
You will need to add 2mm washers behind the calipers to space them out slightly.
You will also need to replace the pins that hold the brake pads into the calipers.

These brakes will fit well under 16x8+20 or something similar. Some people have had them fit under 15's, but I couldn't get them to fit under my set.

At this point in time, I will not be separating these items. They are a package! :)

Located in Penrith, western Sydney area.
We can figure out shipping if needed.

test fitting

photo of calipers, brake lines, rebuild kit, brake booster, pads

crappy photo of the hubs

fitment behind 16s

sik rotors m8