Group Buy: CRW HD CV Joint Kit

Re: Group Buy: CRW HD CV Joint Kit (Eric)

Mon, 27 Jun 2016 11:56:28 GMT

trentmeyer23
The OEM gasket P/N is: 43459-17010.
They are around $5 each from Amayama.

Which way did you end up putting the inner race on, Eric?

If you look on the outer race, there is one side that has a slightly machined slot for the gasket. This side goes towards the gearbox. the flat side of the outer race goes towards the hub.

Re: Group Buy: CRW HD CV Joint Kit (Knightrous)

Mon, 27 Jun 2016 11:47:51 GMT

Eric
Outstanding Deliveries:
WITCHY - Newcastle/Sydney (To be sent by Knightrous)

Was without car last week, so will get onto shipping Witchy's units out this week :)

Re: Group Buy: CRW HD CV Joint Kit (trentmeyer23)

Mon, 27 Jun 2016 09:34:45 GMT

The OEM gasket P/N is: 43459-17010.
They are around $5 each from Amayama.

Which way did you end up putting the inner race on, Eric?

Re: Group Buy: CRW HD CV Joint Kit (Eric)

Mon, 27 Jun 2016 07:55:20 GMT

Hi All,

I fitted mine up on the weekend. the passenger side shaft took a few gentle taps with a hammer to get on. the drivers side took a bit more force but still went on pretty well.

We did find that the gaskets are the wrong size, so if you can salvage your old ones without damaging them you can reuse them, or buy new ones for a couple of dollars from Toyota.

Shipping will begin today, I will PM people individually.

Cheers,

Eric

Outstanding Deliveries:

JDM_GT - Sunshine Coast - Coolum
zvargulis - ACT
Madmr2 - Victoria
Tony - QLD - Pickup
WITCHY - Newcastle/Sydney (To be sent by Knightrous)

Re: Group Buy: CRW HD CV Joint Kit (madmr2)

Fri, 24 Jun 2016 06:16:19 GMT

keen to see how the install goes. Let me know (via PM) when mine is ready to be shipped Eric, will transfer funds ($7.50 + postage to Melbourne) when you're ready.

Re: Group Buy: CRW HD CV Joint Kit (trentmeyer23)

Tue, 21 Jun 2016 22:05:07 GMT

Was there any direction from Josh as to which way they are to be fitted? In one of his replies he said that he would attach a pic of it fitted correctly.

Re: Group Buy: CRW HD CV Joint Kit (Knightrous)

Tue, 21 Jun 2016 14:00:58 GMT

TonyMR2
I thought the inner was machined out to tell you which way it goes on - the angles of the race suit one direction. If his don't have the inner marked, how do we know which way they go on....

From my understanding, they do have markings (they are just not obvious, like "This side out"). You will notice a circular groove on the shaft/boot side.

Re: Group Buy: CRW HD CV Joint Kit (trentmeyer23)

Tue, 21 Jun 2016 12:10:56 GMT

Just PM me when mine arrives and I will arrange collection.

Re: Group Buy: CRW HD CV Joint Kit (Knightrous)

Tue, 21 Jun 2016 11:42:49 GMT

Received mine today, they have been opened by customs, so that explains the delay in shipment :D

Re: Group Buy: CRW HD CV Joint Kit (Eric)

Tue, 21 Jun 2016 09:59:25 GMT

trentmeyer23
How did you go trying to fit them?

Any updates on other packages arriving?

I will be fitting mine this weekend. Josh has assured me that no harm will come from doing this, and the CV's have a lifetime warranty too.

I have received 3/5 parcels. It seems two have been delayed in Sydney.

I will begin shipping them out as of Monday :)

Re: Group Buy: CRW HD CV Joint Kit (Knightrous)

Tue, 21 Jun 2016 08:22:26 GMT

Still waiting for mine :(

Re: Group Buy: CRW HD CV Joint Kit (trentmeyer23)

Tue, 21 Jun 2016 05:52:06 GMT

How did you go trying to fit them?

Any updates on other packages arriving?

Re: Group Buy: CRW HD CV Joint Kit (trentmeyer23)

Fri, 17 Jun 2016 17:40:47 GMT

There should be no need to bash the inner race on. Are you able to remove the inner race easily once it had been done?

Re: Group Buy: CRW HD CV Joint Kit (Falcon)

Fri, 17 Jun 2016 16:47:54 GMT

Nothing like that Tony. You just flick a coin.

Re: Group Buy: CRW HD CV Joint Kit (Guest)

Fri, 17 Jun 2016 11:43:54 GMT

I thought the inner was machined out to tell you which way it goes on - the angles of the race suit one direction. If his don't have the inner marked, how do we know which way they go on....
Be interested to measure them up and see where the difference is made in the design....