1990 SW20 3S-GTE engine mount/stabiliser - RH side top

Re: 1990 SW20 3S-GTE engine mount/stabiliser - RH side top (Brady G)

Wed, 11 May 2016 16:01:04 GMT

That's what I thought TonyMR2, however you can actually see where the mount has been rubbing on the metal bracket.

It looks to be that one Kain :)
That's exactly what mine looks like haha

As far as I'm aware, the turbo and N/A mounts are interchangeable (apart from the supposed 'less durable' N/A ones), is this true?

Re: 1990 SW20 3S-GTE engine mount/stabiliser - RH side top (Guest)

Wed, 11 May 2016 15:29:21 GMT

If it's rocking under acceleration its more likely the front or rear or all engine mounts. I have replaced engine mounts and added the kirasaurus inserts - feels great now :)

Re: 1990 SW20 3S-GTE engine mount/stabiliser - RH side top (Kain)

Wed, 11 May 2016 14:28:06 GMT

Conveniently, my engine is on the ground a couple of metres away. These photos are from a 1990 3SGE, not sure if they apply to you or not, but I expect they should. Part number for mine is 12362-74170.

1990 SW20 3S-GTE engine mount/stabiliser - RH side top (Brady G)

Wed, 11 May 2016 12:48:27 GMT

Hi all!

I'm now the proud owner of an MR2, however I've run into a few complications.. haha
Does anyone have an image of this engine mount (see image)?
It's near the top on the right hand side near the timing belt case..
It has worn away the rubber and is just 'sliding around' causing the engine to rock under acceleration.
So I'm in need of a new one but cannot seem to find the right part at Toyota or any auto shops (looking at the images on their computer).
I'd jack the engine up and take it out to take it into the shops however, I've broken the jack.

It may not even be a mount and may in fact be a stabiliser, not sure.

NOTE: the image attached is not my engine bay, that's for a '91 SW20 I think :/
I'm just not at home atm the cannot get a photo.