Race Seats

Re: Race Seats (Danti)

Fri, 29 Apr 2016 12:36:45 GMT

Supremacy

Danti, hopefully this is what you're after. Photo I took after I installed the seats. Passenger side sits a little higher due ot different brackets used.

Mate that's exactly what I want to see.
I know there are better brand seats but I don't want to spend a lot money. This will do the job for me.

Thank you

Re: Race Seats (Supremacy)

Fri, 29 Apr 2016 11:39:43 GMT

Danti, hopefully this is what you're after. Photo I took after I installed the seats. Passenger side sits a little higher due ot different brackets used.

Re: Race Seats (Danti)

Fri, 29 Apr 2016 11:18:14 GMT

Mate could you take a photo of the seat on car please

Sent from my iPhone using Tapatalk

Re: (Supremacy)

Thu, 28 Apr 2016 09:54:00 GMT

I'm northern suburbs of Melbourne.

Re: Race Seats (Danti)

Wed, 27 Apr 2016 21:46:30 GMT

Thanks supermacy great info.were are you located

Sent from my iPhone using Tapatalk

Re: Race Seats (Supremacy)

Wed, 27 Apr 2016 10:15:51 GMT

Best I could do without pulling the seat out.

Little sketch of the mount I made is attached too.

It's effectively 2 lengths of 5mm thick (approx 100mm wide) steel plate with a slight bend in it to match rear mounting points and at the front it has 2 tabs welded to align with the front mount points. I then put a support beam across to keep both sides aligned.

The side mount rails then bolt on top of this. It's a little bit of a jigsaw to put in (first base plate, then side mounts, and finally seat).

If really need be, I can pull seat out this weekend for proper photos. Car is in an awkward spot to do so during the week.

I've also got a spare of the pre-made brackets since I never used the drivers side one if you would like it.

Re: Race Seats (Danti)

Tue, 26 Apr 2016 18:02:16 GMT

That will be great help thank you

Sent from my iPhone using Tapatalk

Re: (Supremacy)

Tue, 26 Apr 2016 17:42:11 GMT

For the passenger side we used a pre made bracket I purchased.

Driver's side we constucted a custom mount using 5mm x 100mm plate steel to mount on factory mount points. Then using side mounts to hold seat to bracket.

If I remember I'll grab some photos tomorrow morning.

Re: Race Seats (Danti)

Tue, 26 Apr 2016 16:55:58 GMT

thanks for your feed back.
by the way how did you mount them on the car.

Re: Race Seats (Supremacy)

Mon, 18 Apr 2016 22:20:15 GMT

Danti
Supremacy

I've got a pair of these seats in my mr2. From what I gather the shells are made by sparco (from what I've heard).

Even in stock seats , a harness makes a huge difference.

http://m.ebay.com.au/itm/Autotecnica-SPORTS-Racing-SEAT-with-FIXED-BACK-FIBERGLASS-SS07C-All-Blk-/262382225210?nav=SEARCH

And you take your mr to the track if so where they comfy for what they are.

Yes, mine is dedicated to track time. I'm very happy with them and so is my brother. We share the car. Even without the base cushion, it is comfortable and holds us in tight.

We had to fabricate custom mounts to suit us both (6ft tall each)

Re: Race Seats (Danti)

Mon, 18 Apr 2016 21:38:55 GMT

Supremacy

I've got a pair of these seats in my mr2. From what I gather the shells are made by sparco (from what I've heard).

Even in stock seats , a harness makes a huge difference.

http://m.ebay.com.au/itm/Autotecnica-SPORTS-Racing-SEAT-with-FIXED-BACK-FIBERGLASS-SS07C-All-Blk-/262382225210?nav=SEARCH

And you take your mr to the track if so where they comfy for what they are.

Re: Race Seats (Danti)

Mon, 18 Apr 2016 20:53:35 GMT

Yes looking at harness the same time. Just not sure about the seats yet. There are some SAAS seats which I don't mind. Just not sure if anyone has tried them.

Sent from my iPhone using Tapatalk

Re: (Supremacy)

Mon, 18 Apr 2016 20:53:28 GMT

I've got a pair of these seats in my mr2. From what I gather the shells are made by sparco (from what I've heard).

Even in stock seats , a harness makes a huge difference.

http://m.ebay.com.au/itm/Autotecnica-SPORTS-Racing-SEAT-with-FIXED-BACK-FIBERGLASS-SS07C-All-Blk-/262382225210?nav=SEARCH

Re: Race Seats (track_mr2)

Mon, 18 Apr 2016 19:37:11 GMT

Got a harness? Even with fixed bucket seats, without a harness I couldn't stay in the seat.

Race Seats (Danti)

Mon, 18 Apr 2016 15:49:13 GMT

Hi
Im looking for race seats for my SW20. needs to be fixed back
been to few track days and my leather seat are no good. every hard turn i take it feels like im going to land on Passenger seats.
going to wakefield on 12/5 so i found few on line. also im not look to spend around $250.
anyone know anything about this one on eBay.
thanks
http://www.ebay.com.au/itm/Autotecnica-SPORTS-Racing-SEAT-with-FIXED-BACK-Suit-Racecar-A1098BL-Blue-/252352511032?hash=item3ac161bc38:g:dngAAOSwGotWjkI~