﻿<?xml version="1.0" encoding="utf-8"?><rss version="2.0"><channel><title>Toyota mr2 gearbox oil and engine oil sump</title><link>https://www.classic-ford.org/mr2/mr2play/tm.aspx?m=128266</link><description /><copyright>(c) MR2 AUSTRALIA</copyright><ttl>30</ttl><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (artymr2)</title><description>Do the autos have a separate diff section to the gearbox in the transaxle? If yes don't mix them up, they will be two completely different oils. Auto trans fill though dip stick, check level according to instruction, normally with transmission hot and engine running. &lt;br&gt;&lt;br&gt;The diff if separate will generally have a drain plug and fill plug. &lt;br&gt;&lt;br&gt;You could suck the excess engine oil out of the dipstick tube, saves draining too much accidentally. &lt;br&gt;&lt;br&gt;Cheers </description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128322</link><pubDate>Fri, 25 Mar 2016 16:44:40 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (just_ace)</title><description>Yeh, soz. Missed that it was an auto.&lt;br&gt;&lt;br&gt;Wouldnt stress about the extra litre</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128303</link><pubDate>Thu, 24 Mar 2016 16:39:10 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (Falcon)</title><description>Yes&amp;nbsp; Carmikey is correct.&amp;nbsp; There is a dipstick for the auto trans which you use to fill using auto transmission fluid only.&amp;nbsp;&amp;nbsp; I think the other blokes missed that you are using an auto.&amp;nbsp;&amp;nbsp; Often times if you let us know where you are someone may be able to give you a hand to help you&amp;nbsp; become more familiar with your car so you don't make stuffups.&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; It is very unlikely that the engine being a little over full would have caused any problem.&lt;br/&gt;</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128290</link><pubDate>Thu, 24 Mar 2016 09:14:20 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (Carmikey)</title><description>&lt;blockquote class="quote"&gt;&lt;span class="original"&gt;TomsMR2&lt;/span&gt;&lt;br&gt;There is no dipstick for the gearbox&lt;br&gt;The only way to fill it is through the filler plug described earlier&lt;br&gt;You can connect a hose to a funnel and feed it through the engine bay to the hole, that's how I do it&lt;br&gt;&lt;/blockquote&gt;&lt;br/&gt;&lt;br&gt;Auto mr2 do in fact have trans dipsticks.&amp;nbsp;Can fill thru the dipstick tube.&lt;br/&gt;</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128289</link><pubDate>Thu, 24 Mar 2016 08:48:19 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (TomsMR2)</title><description>There is no dipstick for the gearbox&lt;br&gt;The only way to fill it is through the filler plug described earlier&lt;br&gt;You can connect a hose to a funnel and feed it through the engine bay to the hole, that&amp;#39;s how I do it</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128283</link><pubDate>Wed, 23 Mar 2016 21:45:38 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (dkmr23q)</title><description>Is it possible to fill up the car gearbox oil through the dipstick? And a funnel &lt;br&gt;As it&amp;#39;s hard getting to the normal spot to fill up the gearbox oil. That&amp;#39;s my main concern as I&amp;#39;ve never&lt;br&gt;done that before. Also for the engine oil that I put to much in, I will just drain the engine oil out and&lt;br&gt;put new oil in. But is there gonna be damage done to the engine cause I put maybe 1liter more of oil &lt;br&gt;Thanks guys</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128280</link><pubDate>Wed, 23 Mar 2016 18:02:24 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (just_ace)</title><description>The proper place to fill the gearbox up is on front of the gearbox just below the starter motor or thereabouts, same size plug that you drained it with. You need a pump to fill it up, car needs to be level as this also happens to be how you measure if your gearbox is full. &lt;br&gt;&lt;br&gt;The engine sump is the pressed steel pan, its black. Your gearbox is ally casing.</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128272</link><pubDate>Tue, 22 Mar 2016 22:21:01 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (Randomity)</title><description>Also, make sure to use the correct transmission fluid for it. I don&amp;#39;t know what&amp;#39;s recommended, so can&amp;#39;t help you there, unfortunately</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128270</link><pubDate>Tue, 22 Mar 2016 22:07:21 GMT</pubDate></item><item><title>Re: Toyota mr2 gearbox oil and engine oil sump (Randomity)</title><description>Well you're on the wrong side of the engine bay there.&amp;nbsp;&lt;br/&gt;Engine oil drain is on the drivers side of the engine, it's a 14mm bolt sitting on a roughly 45 degree angle towards the front of the car, you'll see it sticking out of the sump pan easily enough.&lt;br/&gt;I can't say from personal experience with auto boxes, since the only time I've dealt with them is to throw them out, but the fill should probably be on the front of the transaxle, (between the engine/gearbox and the front firewall). Probably a 24mm bolt.&lt;br/&gt;If it's the same as an MT transaxle, just fill it til oil comes out of the fill point&lt;br/&gt;</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128268</link><pubDate>Tue, 22 Mar 2016 22:01:48 GMT</pubDate></item><item><title>Toyota mr2 gearbox oil and engine oil sump (dkmr23q)</title><description>Hi I've got a auto 1990 import Toyota mr2, and yesterday I put to much engine oil in it and it started smoking. So today I tried to drain out the engine oil and made a bad mistake and drained out the gearbox oil. So can anyone help me out on where I have to put the gearbox oil into the car? And where is the engine oil sump for me to drain out the engine oil? Thank you</description><link>https://www.classic-ford.org/mr2/mr2play/FindPost/128266</link><pubDate>Tue, 22 Mar 2016 21:19:05 GMT</pubDate></item></channel></rss>