3sgte/sw20/manual clunking real bad from the back end ??

Re: 3sgte/sw20/manual clunking real bad from the back end ?? (RHOK)

Sun, 26 Jul 2015 10:39:01 GMT

I have the same issue - I have rose jointed adjustable rear sway bar links -- I think that is why it clunks on acceleration/deceleration as the weight shifts backwards/forwards

so keep us informed of how you fix it

Re: 3sgte/sw20/manual clunking real bad from the back end ?? (Admin)

Sun, 26 Jul 2015 10:23:50 GMT

Check your sway bar links

Re: 3sgte/sw20/manual clunking real bad from the back end ?? (Monika)

Sun, 26 Jul 2015 01:03:19 GMT

Hi,

My experience with clunking noise is one or more of the following things:

1. Old worn-out Shockie mounts;
2. Old worn-out and dried bushes; and/or
3. Old worn-out shockies.

I have progressively replaced all these parts, with the exception of my front shockies, and I have almost alleviated all clunking noises. Hopefully once I have replaced my front shockies, all noises will be gone.

BTW, I have also replaced all my lower ball joints and the front-end rack, which could be why your front wheel has so much play.

Our babies are moving into the heritage age, and to expect that these parts will last over 15-20 years, is a big ask.....things do wear out eventually!

You can find an example of what I have done to my baby at:

http://www.mr2australia.com/mr2play/tm.aspx?m=91537

Cheers,

M

Re: 3sgte/sw20/manual clunking real bad from the back end ?? (MRTWO)

Sun, 08 Mar 2015 09:35:39 GMT

yea I think your right, that rim has been on the car for a bout a year with no isses, maybe its kiled something ?? I would hae thought the wheel bearing but that seems great

Re: 3sgte/sw20/manual clunking real bad from the back end ?? (Phiz)

Sun, 08 Mar 2015 00:12:17 GMT

If it's just that wheel that's wonky then it could just be how it sits on the hub, it may not fit on the hub and be causing issues.

3sgte/sw20/manual clunking real bad from the back end ?? (MRTWO)

Sat, 07 Mar 2015 21:15:45 GMT

anyone know why my 3sgte mr2 is clunking like crazy after i go over 30kmh in any gear ?? My drivers side wheel looked really wonky spinning on jacks so i put a different wheel on and its rotating fine.
The wheel bearing seams pretty good, the cv joints have some play but nothing major yet it clunks so much ???