FS: Megasquirt DIY PNP for 4AGE/3SGE

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Eric)

Thu, 14 Aug 2014 19:57:14 GMT

Bump $325

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Eric)

Thu, 07 Aug 2014 23:10:59 GMT

Thanks man!

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (just_ace)

Thu, 07 Aug 2014 19:50:54 GMT

ah I see. and the other plug for the older 4a will prob suit the gen1 3sge then. ill post it over on ozcelica. may be some interest as itll suit a 5s also then

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Knightrous)

Thu, 07 Aug 2014 08:15:58 GMT

just_ace
gen3 ge, gen4 ge/gte are 4 plug.

The 72pin connector has 4 plugs. Allows you to cover a bunch of various cars with it. I personally used it for my 4AGE 20V Silvertop and will also be using it for my 1MZFE

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Eric)

Wed, 06 Aug 2014 22:26:30 GMT

So the plug that is currently on the ECU will fit all 3S series engines + black and silvertop 4A's, and may also fit VZ series engines

The other plug does 4a stuff

Currently wired for a gen 2 3sge JDM

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (just_ace)

Wed, 06 Aug 2014 22:05:09 GMT

ok, so its pnp for a gen2 3sge and 2/3gte.

gen2 ge/gte and gen3 gte are the same, (and 92+5sfe)

gen3 ge, gen4 ge/gte are 4 plug.

gen1 ge is old, maybe like 4a.

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Knightrous)

Wed, 06 Aug 2014 21:50:22 GMT

https://www.diyautotune.com/diypnp/models.html
Nippon Denso 76pin Unassembled Kit
Toyota MR2 3SGTE 1991 - 1995
Also does Celica 3SGTE 1990 - 1991

Should work for these.

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (just_ace)

Wed, 06 Aug 2014 18:19:09 GMT

they have physically different plugs.

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Knightrous)

Wed, 06 Aug 2014 17:41:44 GMT

just_ace
which 3sge. gen1,2,3 all have different ecu pin/plugs.

Doesn't matter, you just change the jumper wires inside the ECU to match the loom plugs.

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (just_ace)

Wed, 06 Aug 2014 17:02:01 GMT

which 3sge. gen1,2,3 all have different ecu pin/plugs.

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Eric)

Wed, 06 Aug 2014 16:31:14 GMT

Bump and price drop

$350

I have also soldered it up so that it connects to the 3sge loom. Tested all the inputs and they work

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Eric)

Tue, 03 Jun 2014 23:27:20 GMT

Hey Adrian

You would need to desolder the current Break out board and solder in the Nippondenso 92 pin break out board.
To do this correctly you will need to create a conversion table in excel so you know what wire goes where. I have one of these for a gen 2 3sge and is honestly not that hard

After you wire up the board, you will need a wideband 02 sensor if you plan on tuning the car yourself, if not you would take the car and ecu to a tuner and ask for it to be tuned

Hope that answers your questions :)

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Adrian)

Tue, 03 Jun 2014 22:36:33 GMT

What would be involved in hooking this up to a gen3 3sge? Any extra parts needed or is not ready to be plugged in and tuned?

Re: FS: Megasquirt DIY PNP for 4AGE and 3S expansion (Eric)

Tue, 03 Jun 2014 18:52:40 GMT

Price drop - $400- and bump, need to buy a supercharger

FS: Megasquirt DIY PNP for 4AGE/3SGE (Eric)

Thu, 29 May 2014 13:15:12 GMT

Hi all

I am selling my Megasquirt DIY PNP out of my old AW11 which had a bluetop 4AGE. I no longer need this a I have decided to go for a different ECU on my 1MZ.

This has the v1.5b board, it is fully assembled and ready to go. there is a base map on there that got my car running but you may need to build your own.

It currently has the Nippondenso 92 pin plug installed, but I also have a Nippondenso 42 pin plug that was originally on there

The ND 42 Pin will fit 4A series engines, R series engines
The ND 76 pin it will fit all 3S series engines + black and silvertop 4A's, and may also fit VZ series engines

Please note that there may be other installation requirements for your car.
It also comes with spare cases and other components aswell as a tuning cable.

$350 for the whole kit and caboodle. Can also include a mini laptop for tuning for extra
Located Brisbane but I am willing to post at buyers expense

Thanks

-Eric