Does anyone have AW11 SC rear springs in their shed?

Re: Does anyone have AW11 SC rear springs in their shed? (wiso)

Tue, 06 May 2014 14:44:45 GMT

if you do need something custom you can try here

http://www.allsprings.20m.com/

Talk to Aldo, take your original springs in, with your static height and droop height measurements he will check the spring rate, tell him how much higher you want the car and what spring rate you want he will custom make you a set. it may take a couple of go's in and out to fine tune, but for the price they charge they are bloody good. I am happy with my springs from them.

Re: Does anyone have AW11 SC rear springs in their shed? (Mrskylighter)

Mon, 05 May 2014 22:38:34 GMT

PM sent. Sorry for the delay.

Re: Does anyone have AW11 SC rear springs in their shed? (rallypete)

Sat, 03 May 2014 18:27:31 GMT

I would be interested in having a look at them. I will pull a spring out of my car so we could put them together. Could we meet next week end (mothers day).
Or I could come down 1 evening during the week if that is easier.
PM me?

Re: Does anyone have AW11 SC rear springs in their shed? (rallypete)

Sat, 03 May 2014 17:57:10 GMT

I am in the Hills often as my daughter lives in Galston

Re: Does anyone have AW11 SC rear springs in their shed? (Mrskylighter)

Sat, 03 May 2014 17:54:54 GMT

Yep they are the standard height springs. Have a read through my showroom thread and you'll see the height of them (after I fitted the 15in wheels but before the lowered springs)
I'm in Kenthurst by the way.

Re: Does anyone have AW11 SC rear springs in their shed? (rallypete)

Sat, 03 May 2014 17:45:39 GMT

Marmong point Newcastle - Are they standard height? I am really low with the exhaust which I cannot raise.

Re: Does anyone have AW11 SC rear springs in their shed? (Mrskylighter)

Sat, 03 May 2014 12:40:18 GMT

Where are you located? I have a set of original 1989 jdm SC springs available.
Someone was going to buy them but I haven't heard back.

Does anyone have AW11 SC rear springs in their shed? (rallypete)

Sat, 03 May 2014 09:06:45 GMT

I need a set of original Super Charger springs to lift my Aw11 V6 Rear. The weight of the larger Camry gearbox appears to have lowered the car a little more than I expected. The pipe under the sump from the front bank is less than the RTA will accept and the only springs I can find are low type. I read that the SC springs are stiffer and thought that might help. Alternative is a full coil over set but running low on cash at this stage of the project.