Synchro Issues (1st Gear) E-series Gearbox

Re: Synchro Issues (1st Gear) E-series Gearbox (dasic1)

Tue, 01 Apr 2014 22:40:46 GMT

Didnt think of that

Re: Synchro Issues (1st Gear) E-series Gearbox (Knightrous)

Tue, 01 Apr 2014 17:07:41 GMT

dasic1
Once moving you shouldn't need to jam it in first unless you stop

Motorkhanas can be very demanding on 1st gear depending on the course.

Re: Synchro Issues (1st Gear) E-series Gearbox (dasic1)

Tue, 01 Apr 2014 16:40:40 GMT

Once moving you shouldn't need to jam it in first unless you stop

Re: Synchro Issues (1st Gear) E-series Gearbox (MR2QIK)

Tue, 01 Apr 2014 11:51:16 GMT

Go GL4 as recommended & it should get better. 3rd synchro is the most common to wear first.

Re: Synchro Issues (1st Gear) E-series Gearbox (Road and Track)

Tue, 01 Apr 2014 08:48:46 GMT

a failed 1st gear syncro is very unusual.

oil cannot repair mechanical damage

the correct oil is GL4 rated. Some GL5 rated oils are known to coat the brass syncro rings with an slipery film and they stop working. generally, all gears affected in the same way.

Re: Synchro Issues (1st Gear) E-series Gearbox (Reddtarga)

Mon, 31 Mar 2014 10:38:09 GMT

Replacing synchros is not easy with special tools required, including a press etc.

GL4 or GL5 ??
Check outhttp://www.widman.biz/uploads/Transaxle_oil.pdf
Several GL4 oils are available but you'll have to search for them 'cos they're not stocked at places like Supercheap.

I personally have had very good results over a long period using Amsoil Manual Trasnsmission and Transaxle oil SAE 75W-90 GL4 (Amsoil product code MTG-01)

Another good read:
(Toyota E code gearbox)
http://www.roadandtrack.net.au/index.php/techno/toyota

Re: Synchro Issues (1st Gear) E-series Gearbox (rico)

Mon, 31 Mar 2014 09:20:16 GMT

Regarding gearbox oil to use, i changed to this penrite and its amazing so far

http://www.penriteoil.com...=4&id_products=376

Synchro Issues (1st Gear) E-series Gearbox (Boof)

Sun, 30 Mar 2014 10:42:06 GMT

Hi Guys

Driving my '94 SW20 to the cinemas last night when I noticed that when shifting from 2nd to 1st I get a horrendous crunching unless the engine is idling or very close to it. While I don't have any experience with rebuilding gearboxes or anything I do know enough to be able to assume that my 1st gear synchro is completely shot. Every other gear is fine - both changing up and changing down. I do have the E-series box.

My first step is to change the oil - I know that this is only a bandaid but I've got the 200,000km service coming up as my next service so I'm planning on limping it through until everything comes out and I can have a proper look at it.

Questions:
- Any recommended oils? I've seen threads recommending a 75w-90 (pretty standard) but some people are swearing you should be looking for a GL4 instead of a GL5. Can anyone confirm or deny this?
- Is replacing a synchro easy enough to attempt to do myself? Or would I be finding more luck getting the guys at R&T to look into it? If that is the case how much could I be expecting to look at $$-wise...
- As far as sourcing Synchro's go, is it easy enough to go through Toyota to buy them individually or should I be looking elsewhere?
- Anything I should be aware of while looking into or performing any of this?

Cheers in advance
- Boof