WTB or pls provide specs: SW20 mounting bolts for stock airbox

Re: WTB or pls provide specs: SW20 mounting bolts for stock airbox (Firthy)

Fri, 31 Jan 2014 10:55:03 GMT

To close the loop on this - thanks everyone for your help.

Found ones that fit:

https://www.masters.com.au/product/900041975/champion-blister-socket-head-bolt-8x35-3pk

Cheers

Re: WTB or pls provide specs: SW20 mounting bolts for stock airbox (Firthy)

Thu, 30 Jan 2014 14:28:10 GMT

Ahh google - where would we all be.

http://turbomr2.com/MR2/HowTo/Engine_Upgrade/Removal/Images/8682_Air_Cleaner_Case.JPG

I'll be able to work it out from that. Thank you!

Re: WTB or pls provide specs: SW20 mounting bolts for stock airbox (dasic1)

Thu, 30 Jan 2014 13:52:03 GMT

The head to thread can vary, just a educated guess.
Bolts are measured by the thread not the head.

I seam to have plenty of spare bolts left over if you wanted.

Re: WTB or pls provide specs: SW20 mounting bolts for stock airbox (Firthy)

Thu, 30 Jan 2014 13:44:29 GMT

Thanks mate - I didn't know a bolt head measurement was linked to the thread as well. Yep 12mm head bolt.

Cool well at least if I know that they're linked then I can just get a range of lengths of bolt and try them. I remember them being fairly long - 10cm ish I think.

Cheers!

Re: WTB or pls provide specs: SW20 mounting bolts for stock airbox (dasic1)

Thu, 30 Jan 2014 13:40:15 GMT

I dont have that plate so cant cheek. But I would say M8x1.25. No idea on the length

You mean the head is 12mm? That would make the threaded part 8mm. 1.25 is a pretty common thread pitch on the MR2

Re: WTB or pls provide specs: SW20 mounting bolts for stock airbox (Firthy)

Thu, 30 Jan 2014 13:14:01 GMT

Here's some good pics - it's the three bolts shown in the bottom of the air box in these pics.

http://www.turbomr2.com/MR2/HowTo/APEXi%20Intake/Apexi-009.JPG

And they mount through the plate shown here:

http://www.turbomr2.com/MR2/HowTo/APEXi%20Intake/Apexi-017.JPG

They are 12 mm but I would love to know length/screw pattern please so I can buy the right thing.

Cheers

WTB or pls provide specs: SW20 mounting bolts for stock airbox (Firthy)

Thu, 30 Jan 2014 11:14:56 GMT

Morning folks,

I'm reinstalling the stock air intake/air box in place of the pod mount I currently have. I have all the bits EXCEPT the three large bolts that mount through the bottom of the airbox, through the mounting plate onto the car.

Does anyone in VIC have some I could buy, or can provide me the length/width/thread patterns so I can get replacements?

The mounting plate is shown as number 2 in this diagram; I cannot find part numbers or specs for the screws/bolts themselves.

http://www.lithiatoyotaparts.com/parts/1992/Toyota/MR2/Turbo?siteid=215542&vehicleid=86939&diagram=8420175&diagramCallOut=2

Cheers folks.